2002 - 2006 OEM Acura RSX 3 Button Keyless Entry Remote Fob - OUCG8D-355H-A

2002 - 2006 OEM Acura RSX 3 Button Keyless Entry Remote Fob - OUCG8D-355H-A
Dealer Price $135.99 Your Price $72.76 You save $63.23 That's 46.5% OFF dealer price!
Availability: In stock
SKU
251

2002 - 2006 OEM Acura RSX 3 Button Keyless Entry Remote Fob - OUCG8D-355H-A


Fits:

2002 - 2006 Acura RSX

IMPORTANT: Due to these remotes being almost 20 years old, we usually re-case the original Acura electronics into a brand new outer casing. The brand new case is dark gray in color and would not have an Acura logo. If you want one with the original case please contact us. Please note if you wish to purchase this item in it's original case and wish it to be in great condition, it will cost much more than the price we advertise here. 

180 Day Satisfaction Guarantee!

If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further information.

 

More Information
SKU251
FCC NumberOUCG8D-355H-A
OE Part #72147-S6M-A02
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
Programming InformationPlease Check if your vehicle has Self-Programming instructions by Clicking the Tab Above. "Programming Instructions"
Product ConditionRefurbished
Programming Instructions

2002 - 2006 Acura RSX

The codes of up to three transmitters can be read into the keyless receiver unit memory. (If a fourth code is stored, the code which was input first will be erased.)

NOTE: It is important to maintain the time limits between the steps. Make sure the doors and the hatch are closed.

1. Turn the ignition switch ON (II).

2. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit.

3. Within 1 to 4 sec., turn the ignition switch OFF.

4. Within 1 to 4 sec., turn the ignition switch ON (II).

5. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit.

6. Within 1 to 4 sec., turn the ignition switch OFF.

7. Within 1 to 4 sec., turn the ignition switch ON (II).

8. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit.

9. Within 1 to 4 sec., turn the ignition switch OFF.

10. Within 1 to 4 sec., turn the ignition switch ON (II).

11. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit.

12. YOU SHOULD NOW HAVE HEARD THE SOUND OF THE DOOR LOCK ACTUATORS! Within 1 to 4 sec., push the transmitter lock or unlock button again.

13. Within 10 sec., aim any remaining transmitters (up to two additional ones) whose codes you want to store at the receiver, and press the transmitter lock or unlock buttons. Confirm that you can hear the sound of the door lock actuators after each transmitter code is stored.

14. Turn the ignition switch OFF, and pull out the key.

15. Confirm proper operation of the transmitters.

msrp135.99