Enter Your Email Address For

An Instant $5.00 OFF Coupon!

Find My Remote or Key Now!

2007 - 2016 OEM GM 5 Button Keyless Entry Remote w/ Remote Start/Liftgate - OUC60270/OUC60221

Availability: In stock

Dealer Price: $157.00

$46.99

You Save: $110.01

That's 70.07% OFF Dealer price!

this link

2-Years Extended Warranty Plan

Replace My Remote offers an optional Extended 2-Year warranty on all remote and remote key products for Only $7.99. You can view the full terms and coverage of the warranty by clicking the  blue "View All Terms" link. Simply check the "Warranty" check box to add the 2 year extended warranty to your product.

This is an authentic factory/OEM device meant to operate your specific vehicle.

70.07%
off

2007 - 2016 OEM GM 5 Button Keyless Entry Remote w/ Remote Start/Liftgate - OUC60270/OUC60221

More Views

2007 - 2017 OEM GM 5 Button Keyless Entry Remote w/ Remote Start/Liftgate - OUC60270/OUC60221

Interchangeable part #'s - 22936101,15913415, 22756459, 22951509, 25836188, 20952477

Interchangeable FCC ID: M3N5WY8109

Fits:   

2007 - 2017 Buick Enclave
2007 - 2010 Cadillac Escalade
2007 - 2014 Chevrolet Tahoe
2007 - 2016 Chevrolet Traverse
2007 - 2011 Chevrolet Suburban
2007 - 2016 GMC Acadia
2007 - 2011 GMC Sierra
2007 - 2011 GMC Yukon
2007 - 2010 Saturn Outlook

Additional Information

SKU 913
FCC Number OUC60270/OUC60221
OE Part # 22936101,15913415, 22756459, 22951509, 25836188, 20952477
Support Your purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee! If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further info
Programming Information SOME models come with self programming instructions. You can view them under the 'Programming Instructions' tab. All other models will need an automotive locksmith to come out and program the unit in for you. NOTE: When looking under the 'Programming Instructions' tab please look for your specific year and model as the programming instructions vary.
Product Condition Refurbished
Manufacturer's Suggested Retail Price $157.00

2008 - 2010 Buick Enclave
2007 - 2010 Cadillac Escalade
2007 - 2011 Chevrolet Tahoe
2009 - 2010 Chevrolet Traverse
2007 - 2010 Chevrolet Suburban
2007 - 2010 GMC Acadia

2008-2010 GMC Sierra
2007 - 2010 GMC Yukon



PROCEDURE #1
THIS PROCEDURE IS FOR VEHICLES WITH THE DRIVER INFORMATION CENTER. IT WILL BE A BUTTON TO THE RIGHT OF THE STEERING WHEEL WITH A VEHICLE ICON AND THE LETTER i.

1.Insert key and switch the ignition ON (just shy of starting vehicle without cranking engine)

2. Press vehicle information button until PRESS TO RELEARN REMOTE KEY is displayed.

3. Press the set/reset button (button will have a checkmark) until REMOTE KEY LEARNING ACTIVE is displayed. Vehicle is now in programming mode.

4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.

5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.

6. To exit programming mode turn ignition OFF, remove key and test all remotes.

PROCEDURE #2
THIS PROCEDURE IS FOR VEHICLES WITHOUT THE DRIVERS INFORMATION CENTER.

1. Insert key into the ignition and turn to ON (Just shy of starting vehicle without cranking engine).

2. Press the trip odometer reset button until RELEARN REMOTE KEY is displayed.

3. Press and hold the trip odometer reset button for approximately 3 seconds until REMOTE KEY LEARNING ACTIVE displays.

4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.

5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.

6. To exit programming mode turn ignition OFF, remove key and test all remotes.


2007 GMC Sierra

Obtain all remote transmitters for this vehicle.

 

PROCEDURE #1 (FOR NEW BODY STYLE)


THIS PROCEDURE IS FOR VEHICLES WITH THE DRIVER INFORMATION CENTER. IT WILL BE A BUTTON TO THE RIGHT OF THE STEERING WHEEL WITH A VEHICLE ICON AND THE LETTER i.


1.Insert key and switch the ignition ON (just shy of starting vehicle without cranking engine).


2. Press vehicle information button until PRESS TO RELEARN REMOTE KEY is displayed.


3. Press the set/reset button (button will have a checkmark) until REMOTE KEY LEARNING ACTIVE is displayed. Vehicle is now in programming mode.


4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.


5. Repeat step 3. to program additional remotes. You can have up to 8 programmed remotes for this vehicle.


6. To exit programming mode turn ignition OFF, remove key and test all remotes.

 

PROCEDURE #2 (FOR OLD BODY STYLE)

THIS PROCEDURE IS FOR VEHICLES WITHOUT THE DRIVER INFORMATION CENTER.

1. Close all doors.


2. Insert key into the ignition.


3. Press and hold the power UNLOCK button on driver's side door panel. Do not release until instructed to do so.


4. Quickly turn the ignition ON, OFF, ON, OFF. (ON is the position just shy of starting your vehicle, OFF is the position where you can remove your key).


5. Release the power unlock button on the driver's side door panel. The vehicle should respond by locking and unlocking automatically. If locks cycle then continue to step 6.(if the door locks begin to lock and unlock BEFORE releasing the unlock button then the vehicle has not entered programming mode and you must start over. Remove key, open door and return to step 1. If the vehicle continues to lock and unlock before releasing the unlock button then there is a problem with the vehicles system and remotes must be programmed by a certified professional. If you are unable to get the door locks to cycle then you are turning the key too quick or too slow).


6. Hold the LOCK and UNLOCK buttons on the remote at the same time until door locks cycle again. This could take up to 30 seconds.


7. NOW repeat step 6. for all additional remotes including working ones


8. After step 6. has been performed for all remotes TURN ignition to ON to exit programming mode.


9. Turn ignition to OFF, remove key and test all remotes.

 

2007 - 2010 Saturn Outlook


Obtain all remote transmitters for this vehicle.

 

PROGRAMMING WITH DRIVER INFORMATION CENTER

 

1: Switch ignition ON.

 

2: Press vehicle information button (located just to the right of the steering wheel) until PRESS TO RELEARN REMOTE KEY is displayed.

 

3: Press set/reset button (located just to the right of the steering wheel, will have a checkmark on it) until REMOTE KEY LEARNING ATIVE is displayed.

 

4: Programming mode now activated. Press and hold LOCK and UNLOCK buttons on the first remote for 15 seconds. When that remote is programmed an acoustic tone will be heard.

 

5: Repeat step 4 for any other additional remotes.

 

6: To exit programming mode switch ignition to off and then test all remotes.

 

PROGRAMMING WITHOUT DRIVER INFORMATION CENTER

 

 

1: Switch ignition on.

 

2: Press trip/odometer reset button (upper left of instrument cluster) until RELEARN REMOTE KEY is displayed.

 

3: Press and hold trip/odometer reset button for 3 seconds, REMOTE KEY LEARNING ACTIVE will be displayed.

 

4: Vehicle now in programming mode. Press and hold LOCK and UNLOCK buttons on first transmitter for 15 seconds

 

5: When an audible tone is heard first remote is programmed. Repeat step 4 for any other remotes.

 

6: To exit programming mode just switch key off.

 


 




Customer Reviews of Our Service
Please Note: Reviews about self-programming do not indicate the product above is self-programmable. Please inquire about each product.
Back up
1