Enter Your Email Address For

An Instant $5.00 OFF Coupon!

Find My Remote or Key Now!

2010 - 2015 Cadillac SRX 5B w/ Hatch Smart Key - Emergency key included - NBG009768T

Availability: In stock

Dealer Price: $252.98

$114.99

You Save: $137.99

That's 54.55% OFF Dealer price!

this link

2-Years Extended Warranty Plan

Replace My Remote offers an optional Extended 2-Year warranty on all remote and remote key products for Only $7.99. You can view the full terms and coverage of the warranty by clicking the  blue "View All Terms" link. Simply check the "Warranty" check box to add the 2 year extended warranty to your product.

This is an authentic factory/OEM device meant to operate your specific vehicle.

54.55%
off

2010 - 2015 Cadillac SRX 5B w/ Hatch Smart Key - Emergency key included - NBG009768T

More Views

2010 - 2015 Cadillac SRX 5B w/ Hatch Smart Key - Emergency key included - NBG009768T

Ekey - 459

Fits:

2010 - 2015 Cadillac SRX

Additional Information

SKU 450
FCC Number NBG009768T
OE Part # 13502537
Support Your purchase gives you 100% Free email and phone technical support service from our expert staff.
180 Day Satisfaction Guarantee! If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further info
Programming Information Please Check if your vehicle has Self-Programming instructions by Clicking the Tab Above. "Programming Instructions"
Product Condition Refurbished
Manufacturer's Suggested Retail Price $252.98

2010 - 2015 Cadillac SRX Programming Instructions: Please Check your Manual for Instructions as Cadillac's are Self-Programmable and Instruction's are Normally in your Owner's Manual.

You have one programmed remote and you want to add another. 

1. Vehicle must be off.

2. Place the working remote(s) in the cupholder. Have the new remote with you.

3. Insert the key into the key lock cylinder located on the outside of drivers door.

4.Turn the key to the unlock position five times with in ten seconds.

5. The (DIC) Driver Information Center displays Ready to Learn Electronic key #2, 3, 4 ETC.

6. Place the new remote into the transmitter pocket with the buttons facing the front
    of the vehicle. (The transmitter pocket is inside the center console between the 
    driver and front passanger seats). The storage area will need to be opened and the 
    storage tray lifted up to access the transmitter pocket.

7. Press the ignition. When the remote is learned the DIC display will show that it is 
    ready to program the next remote.

8. Remove the remote from the transmitter pocket and press unlock on the remote.

9. To program additional remotes, repeat Steps 6 through 8.

10. When all additional transmitters are programmed, press and hold the ignition for
      ten seconds to exit programming mode.

      You have no working remotes. 

1. The vehicle must be off.

2. Insert the key into the key lock cylinder located on the outside of drivers door.

3.Turn the key to the unlock position five times with in ten seconds.

4. The (DIC) Driver Information Center displays REMOTE LEARN PENDING, PLEASE WAIT.

5. Wait for ten minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN
    and then press the ignition.
    The DIC displays will again show REMOTE LEARN PENDING, PLEASE WAIT.

6. Repeat Step 5 two additional times. After the third time all previously known remotes will
    no longer work with the vehicle. Remaining remotes can be relearned during the next steps.
    The DIC display should now show READY FOR REMOTE #1

7.  Place the new remote into the transmitter pocket with the buttons facing the front
    of the vehicle. (The transmitter pocket is inside the center console between the 
    driver and front passanger seats). The storage area will need to be opened and the 
    storage tray lifted up to access the transmitter pocket.

8. Press the ignition. When the remote is learned the DIC display will show that it is 
    ready to program the next remote.

9. Remove the remote from the transmitter pocket and press unlock on the remote.

10. To program additional remotes, repeat Steps 7 through 9.

11.  When all additional transmitters are programmed, press and hold the ignition for
       ten seconds to exit programming mode.

Customer Reviews of Our Service
Please Note: Reviews about self-programming do not indicate the product above is self-programmable. Please inquire about each product.
Back up
1
Get Your Coupon Now for
3% Off Your Purchase!
Receive a 3% Off Coupon Code in Your email within just minutes by simply signing up for our Newsletter. Then, just apply the coupon code at checkout for Your Savings.