2006 - 2017 NEW GM 4 Button Keyless Entry Remote w/ Remote Start - OUC60270, OUC60221

Dealer Price $135.99 Your Price $40.65 You save $95.34 That's 70.11% OFF dealer price!
Availability: In stock
SKU
935-A
  • Buy 2 for $36.58 each and save 10%
  • Buy 3 for $34.55 each and save 15%

2006 - 2017 NEW GM 4 Button Keyless Entry Remote w/ Remote Start - OUC60270, OUC60221

Fits:

2007 - 2015 Buick Enclave
2007 - 2010 Cadillac Escalade
2010 Cadillac Ext
2007 - 2015 Chevrolet Avalanche
2011 - 2015 Chevrolet Captiva Sport
2008 - 2015 Chevrolet Express
2007 - 2013 Chevrolet Silverado
2008 - 2014 Chevrolet Suburban
2007 - 2014 Chevrolet Tahoe
2007 - 2017 Chevrolet Traverse
2007 - 2016 GMC Acadia
2008 - 2013 GMC Savana
2007 - 2013 GMC Sierra
2008 - 2014 GMC Yukon
2007 - 2010 Saturn Outlook
2008 - 2009 Saturn Vue
2008 Suzuki XL7

180 Day Satisfaction Guarantee!

If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further information.

 

More Information
SKU935-A
FCC NumberOUC60270, OUC60221
OE Part #15913421, 22936098, 20952474, 20868672, 22759546
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
Programming InformationSOME models come with self programming instructions. You can view them under the 'Programming Instructions' tab. All other models will need an automotive locksmith to come out and program the unit in for you. NOTE: When looking under the 'Programming Instructions' tab please look for your specific model as the programming instructions vary.
Product ConditionNew Aftermarket
Programming Instructions

Vehicle made AFTER 2010 are NOT self programmable


2007 - 2010 Buick Enclave
2010 Cadillac Ext
2007 - 2010 Chevrolet Avalanche
2008 - 2010 Chevrolet Express
2007 - 2010 Chevrolet Silverado
2008 - 2010 Chevrolet Suburban
2007 - 2010 Chevrolet Tahoe
2007 - 2010 Chevrolet Traverse
2007 - 2010 GMC Acadia
2008 - 2010 GMC Savana
2007 - 2010 GMC Sierra
2008 - 2010 GMC Yukon

PROCEDURE #1
THIS PROCEDURE IS FOR VEHICLES WITH THE DRIVER INFORMATION CENTER. IT WILL BE A BUTTON TO THE RIGHT OF THE STEERING WHEEL WITH A VEHICLE ICON AND THE LETTER i.

1.Insert key and switch the ignition ON (just shy of starting vehicle without cranking engine)

2. Press vehicle information button until PRESS TO RELEARN REMOTE KEY is displayed.

3. Press the set/reset button (button will have a checkmark) until REMOTE KEY LEARNING ACTIVE is displayed. Vehicle is now in programming mode.

4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.

5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.

6. To exit programming mode turn ignition OFF, remove key and test all remotes.

PROCEDURE #2
THIS PROCEDURE IS FOR VEHICLES WITHOUT THE DRIVERS INFORMATION CENTER.

1. Insert key into the ignition and turn to ON (Just shy of starting vehicle without cranking engine).

2. Press the trip odometer reset button until RELEARN REMOTE KEY is displayed.

3. Press and hold the trip odometer reset button for approximately 3 seconds until REMOTE KEY LEARNING ACTIVE displays.

4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.

5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.

6. To exit programming mode turn ignition OFF, remove key and test all remotes.


2007 - 2010 Saturn Outlook

PROGRAMMING WITH DRIVER INFORMATION CENTER

1: Switch ignition ON.

2: Press vehicle information button (located just to the right of the steering wheel) until PRESS TO RELEARN REMOTE KEY is displayed.

3: Press set/reset button (located just to the right of the steering wheel, will have a checkmark on it) until REMOTE KEY LEARNING ATIVE is displayed.

4: Programming mode now activated. Press and hold LOCK and UNLOCK buttons on the first remote for 15 seconds. When that remote is programmed an acoustic tone will be heard.

5: Repeat step 4 for any other additional remotes.

6: To exit programming mode switch ignition to off and then test all remotes.

PROGRAMMING WITHOUT DRIVER INFORMATION CENTER

1: Switch ignition on.

2: Press trip/odometer reset button (upper left of instrument cluster) until RELEARN REMOTE KEY is displayed.

3: Press and hold trip/odometer reset button for 3 seconds, REMOTE KEY LEARNING ACTIVE will be displayed.

4: Vehicle now in programming mode. Press and hold LOCK and UNLOCK buttons on first transmitter for 15 seconds

5: When an audible tone is heard first remote is programmed. Repeat step 4 for any other remotes.

6: To exit programming mode just switch key off.




msrp135.99