2007 - 2014 NEW Replacement GM 6 Button Keyless Entry Remote w/ Remote Start - OUC60270, OUC60221

2007 - 2014 NEW Replacement GM 6 Button Keyless Entry Remote w/ Remote Start - OUC60270, OUC60221
Dealer Price $129.99 Your Price $42.79 You save $87.2 That's 67.08% OFF dealer price!
Availability: In stock
SKU
904-A
  • Buy 2 for $38.51 each and save 10%
  • Buy 3 for $36.37 each and save 15%

2007 - 2014 NEW Replacement GM 6 Button Keyless Entry Remote w/ Remote Start - OUC60270, OUC60221

Fits:   

2007 - 2013 Cadillac Escalade
2007 - 2014 Chevrolet Suburban
2007 - 2014 Chevrolet Tahoe
2007 - 2014 GMC Yukon

180 Day Satisfaction Guarantee!

If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further information.

 

More Information
SKU904-A
FCC NumberOUC60270, OUC60221
OE Part #15913427, 20869057, 22756462, 15857840
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
Programming InformationSOME models come with self programming instructions. You can view them under the 'Programming Instructions' tab. All other models will need an automotive locksmith to come out and program the unit in for you. NOTE: When looking under the 'Programming Instructions' tab please look for your specific model as the programming instructions vary.
Product ConditionNew Aftermarket
Programming Instructions

2011+ Vehicles are not self-programmable and will require an Automotive Locksmith in your area to program to your vehicle.

2007 - 2010 Cadillac Escalade
2007 - 2010 Chevrolet Suburban
2007 - 2010 Chevrolet Tahoe
2007 - 2010 GMC Yukon

PROCEDURE #1
THIS PROCEDURE IS FOR VEHICLES WITH THE DRIVER INFORMATION CENTER. IT WILL BE A BUTTON TO THE RIGHT OF THE STEERING WHEEL WITH A VEHICLE ICON AND THE LETTER i.

1.Insert key and switch the ignition ON (just shy of starting vehicle without cranking engine)

2. Press vehicle information button until PRESS TO RELEARN REMOTE KEY is displayed.

3. Press the set/reset button (button will have a checkmark) until REMOTE KEY LEARNING ACTIVE is displayed. Vehicle is now in programming mode.

4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.

5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.

6. To exit programming mode turn ignition OFF, remove key and test all remotes.

PROCEDURE #2
THIS PROCEDURE IS FOR VEHICLES WITHOUT THE DRIVERS INFORMATION CENTER.

1. Insert key into the ignition and turn to ON (Just shy of starting vehicle without cranking engine).

2. Press the trip odometer reset button until RELEARN REMOTE KEY is displayed.

3. Press and hold the trip odometer reset button for approximately 3 seconds until REMOTE KEY LEARNING ACTIVE displays.

4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.

5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.

6. To exit programming mode turn ignition OFF, remove key and test all remotes.

msrp129.99