2005 - 2019 OEM Nissan 3 Button Keyless Entry Remote Fob - CWTWB1U733, CWTWB1U821,CWTWB1U415

Please contact us via phone (1-855-224-7258 EXT-3) or live support chat to the bottom right of our website to confirm programming for this product. Our techs will make sure you know everything you need to!

If our techs inform you that this product needs to be programmed by a Locksmith, you may do Google search here for 'automotive locksmith' followed by your zip code. We suggest calling Locksmiths to find the best rate for the programming and/or cutting service.

2009-2012 Nissan Armada
2005 - 2018 Nissan Frontier
2012 Nissan NV
2015 - 2016 Nissan NV
2006 - 2012 Nissan Pathfinder
2006 – 2015  Nissan Titan
2007 - 2012 Nissan Versa Hatchback (for vehicles without push-button or twist knob ignition)
2005 - 2016 Nissan Xterra

Step by Step How to Program Instructions:

IMPORTANT: Before entering programming mode, have in possession all of the transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory. The other transmitters will not be functional until you program the transmitters again. 

1. Close and lock all doors with the driver’s side power lock/unlock switch.
    
   2.  Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast, system will not enter programming mode.
   
   3.   Insert key into the ignition cylinder and turn to the ACC position.
   
   4.   Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press the button more than one time in the above step. If the button is pressed more than one time, the programming procedure will not be successful.
   
   5.   If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should flash. Repeat this step for each transmitter (including any existing transmitters).

6. Turn the key to the OFF position then remove keys from the ignition.  Unlock the doors using the driver's side power unlock/lock switch and open the drivers side door.