2000 - 2001 Infiniti 3 Button QX4 Keyless Remote - Production after 11/2000 only (call for confirmation)

Dealer price: $139.99

Your price: $78.00

You Save: $61.99

That's 44.28% OFF dealer price!

In stock
2000 - 2001 Infiniti 3 Button QX4 Keyless Remote - Production after 11/2000 only (call for confirmation)

2000 - 2001 Infiniti 3 Button QX4 Keyless Remote -  Production after 11/2000 only (call for confirmation)

Fits:

2000 - 2001 Infiniti QX4

Product Specs and Programming Information
SKU 1054
FCC Number KBRASTU10
OE Part # 28268-2W612
Support Your purchase gives you 100% Free email and phone technical support service from our expert staff.
180 Day Satisfaction Guarantee! If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming Information This remote comes with self programming instructions. You can view them under the 'Programming Instructions' tab.
Product Condition Refurbished
Programming Instructions

IMPORTANT: Before entering programming mode, have in possession all of the transmitters
you will be using on the vehicle. Once you program the transmitter, all previous codes will
be erased from the memory. The other transmitters will not be functional until you program
the transmitters again. 
 

1.   Close and lock all doors with the driver’s side power lock/unlock switch.
 
2.   Insert key into ignition and remove it from the ignition key cylinder at least six times
     within 10
seconds. Your Hazard Lamps will flash if you have performed this step
     successfully. NOTE: Withdraw key completely from
ignition cylinder
each time. If this
     procedure is performed too fast, system will not enter programming mode.

3.   Insert key into the ignition cylinder and turn to the ACC position.

4.   Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should
     flash.
NOTE: Do not press the button more than one time in the above step. If the button
     is pressed more than one time, the
programming
procedure will not be successful.


5.   If there are any remaining transmitters (including the old ones), unlock then lock all doors
     using the
driver’s side power lock/unlock switch and within 5 seconds, push ANY button
     on the next remote. Your Hazard
Lamps should flash. Repeat this step for each
     transmitter (including any existing transmitters).

6.  Turn the key to the OFF position, remove keys from the ignition, unlock doors using the
    driver’s side power lock/unlock switch and open the driver side door.

msrp $139.99
Copyright © 2019-present Replacemyremote.com All rights reserved.