2000 - 2001 Infiniti I30 4 Button Keyless Entry Remote Fob - KBRASTU10 - Model /01A

Your price: $87.99

In stock
2000 - 2001 Infiniti I30 4 Button Keyless Entry Remote Fob - KBRASTU10 - Model /01A

2000 - 2001 Infiniti I30 4 Button Keyless Entry Remote Fob - KBRASTU10 - Model /01A

*IMPORTANT* Your current remote has a Model number on the back of it. You MUST match this up with the replacement remote. This unit's model is: Model /01A. For Model /A click here

Production after 06/2000 only

Fits:

2000 - 2001 Infiniti I30

Product Specs and Programming Information
SKU 1056-M/01A
FCC Number KBRASTU10
OE Part # 28268-5Y000
Support Your purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee! If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming Information This remote comes with self programming instructions. You can view them under the 'Programming Instructions' tab.
Product Condition Refurbished
Programming Instructions

1.   Close and lock all doors with the driver’s side power lock/unlock switch.
 
2.   Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard
     Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder
      each time. If this procedure is performed too fast, system will not enter programming mode.

3.   Insert key into the ignition cylinder and turn to the ACC position.

4.   Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press
     the button more than one time in the above step. If the button is pressed more than one time, the programming
     procedure will not be successful.


5.   If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side
     power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should
     flash. Repeat this step for each transmitter (including any existing transmitters).

6.   Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door.

Copyright © 2019-present Replacemyremote.com All rights reserved.