2002 - 2007 Nissan & Infiniti 3 Button Keyless Entry Remote Fob - KBRASTU15

Dealer price: $158.99

Your price: $32.99

You Save: $126.00

That's 79.25% OFF dealer price!

In stock
2002 - 2007 Nissan & Infiniti 3 Button Keyless Entry Remote Fob - KBRASTU15

2002 - 2007 Nissan & Infiniti 3 Button Keyless Entry Remote Fob - KBRASTU15

Fits:

2002 - 2006 Nissan Frontier Pickup
2003 - 2006 Nissan Murano
2002 - 2004 Nissan Pathfinder
2003 - 2006 Nissan Quest
2002 - 2006 Nissan Titan
2002 - 2006 Nissan X-Terra
2002 - 2003 Infiniti QX4
2003 - 2007 Infiniti FX35
2003 - 2007 Infiniti FX45

Product Specs and Programming Information
SKU 2125
FCC Number KBRASTU15
OE Part # 28268-7Z800, 28268-5W501, 28268-5W500, 28268-C990A, 28268-5W50A
Support Your purchase gives you 100% Free email and phone technical support service from our expert staff.
180 Day Satisfaction Guarantee! If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming Information This remote comes with self programming instructions. You can view them under the 'Programming Instructions' tab. If your vehicle uses the smart key/smart entry then it must be programmed by a locksmith.
Product Condition Refurbished
Programming Instructions

You must have all remotes on hand when performiong this procedure. Any remotes not used during this procedure will become inactive.

 If your vehicle uses the smart key/smart entry then it must be programmed by a locksmith.


1.   Close and lock all doors with the driver’s side power lock/unlock switch.
 
2.   Insert key into ignition and remove it from the ignition key cylinder at least six times 
     within 10
 seconds. Your Hazard Lamps will flash if you have performed this step 
     successfully. NOTE: Withdraw key completely from 
ignition cylinder 
each time. If this 
     procedure is performed too fast, system will not enter programming mode. 

3.   Insert key into the ignition cylinder and turn to the ACC position.

4.   Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should
     flash.
 NOTE: Do not press the button more than one time in the above step. If the button
     is pressed more than one time, the
 programming 
procedure will not be successful.

5.   If there are any remaining transmitters (including the old ones), unlock then lock all doors
     using the 
driver’s side power lock/unlock switch and within 5 seconds, push ANY button 
     on the next remote. Your Hazard Lamps should flash. Repeat this step for each 
     transmitter (including any existing transmitters). 

6.  Turn the key to the OFF position, remove keys from the ignition, unlock doors using the 
    driver’s side power lock/unlock switch and open the driver side door.

msrp $158.99
Copyright © 2019-present Replacemyremote.com All rights reserved.