2002 - 2009 Lexus 3 Button Remote Head Key - HYQ12BBT

Dealer price: $206.00

Your price: $108.00

You Save: $98.00

That's 47.57% OFF dealer price!

In stock

2002 - 2009 Lexus 3 Button Remote Head Key - HYQ12BBT

2002 - 2009 Lexus 3 Button Remote Head Key - HYQ12BBT

OE: 89070-33750

Notes: Short Key Blade version - White car printed on button

Fits:   

2004 - 2007 Lexus ES330
2002 - 2009 Lexus SC430

 

The following year and model remote portion cannot be self programmed:

2007 ES330

Product Specs and Programming Information
SKU 1502
FCC Number HYQ12BBT
OE Part # 89070-33750
Support Your purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee! If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming Information This remote comes with self programming instructions (EXCEPT for the 2007 ES330 model) that you can view under the 'Programming Instructions' tab. These instructions ONLY program the remote portion of the key. The key must be cut and the chip must be programmed in FIRST in order to self program the remote portion. An automotive locksmith can come out and cut/program the unit in for you. The cost for key cutting/program will vary depending on your location.
Product Condition Refurbished
Programming Instructions

IMPORTANT: These instructions ONLY program the remote portion of the key. The key must be cut and the chip must be programmed in FIRST in order to self program the remote portion. 

 

Please look for your Lexus model and use the programming instructions provided. 2007 Lexus ES330 remote portion cannot be self programmed and will need to be programmed in by the automotive locksmith. 


 

2004 - 2006 Lexus ES330 & 2005 - 2009 Lexus SC430

Obtain all remote transmitters for this vehicle.

 

1. Start with the key out of the ignition, drivers door is open, all other doors and trunk closed and drivers door is unlocked.


2. Perform these steps within 5 seconds. A. Insert the key into the ignition (Do NOT Turn it) and Pull key out. B. Insert the key into the ignition (Do NOT Turn it) and Pull key out.


3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition (Do NOT Turn it) and Pull key out.


4. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in the ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start or crank engine) then back to OFF. F. Remove the key from the ignition.


5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the door locks do not cycle at this point.


6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote.


7. Open drivers door.

 

 

2002 - 2004 Lexus SC430

 Obtain all remote transmitters for this vehicle.

 

1. Start with the key out of the ignition, drivers door is open, all other doors and trunk closed and drivers door is unlocked.


2. Perform these steps within 5 seconds. A. Insert the key into the ignition (Do NOT Turn it) and Pull key out. B. Insert the key into the ignition (Do NOT Turn it) and Pull key out.


3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition (Do NOT Turn it) and Pull key out.


4. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in the ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start or crank engine) then back to OFF. F. Remove the key from the ignition.


5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the door locks do not cycle at this point.


6. Within 40 seconds press both the LOCK and UNLOCK simultaneously twice. Repeat this step for each remaining remote to be programmed.


7. Open drivers door.

 

msrp $206.00
Copyright © 2019-present Replacemyremote.com All rights reserved.