2005 - 2007 Chevrolet Corvette 4 Button Keyless Entry Remote Fob - M3N65981403

Dealer price: $162.26

Your price: $92.99

You Save: $69.27

That's 42.69% OFF dealer price!

In stock
2005 - 2007 Chevrolet Corvette 4 Button Keyless Entry Remote Fob - M3N65981403

2005 - 2007 Chevrolet Corvette 4 Button Keyless Entry Remote Fob - M3N65981403


2005 - 2007 Chevrolet Corvette

Product Specs and Programming Information
SKU 507
FCC Number M3N65981403
OE Part # Driver 1: 10372541 Driver 2: 10372542
Support Your purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee! If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming Information This remote comes with self programming instructions. You can view them under the 'Programming Instructions' tab.
Product Condition Refurbished
Programming Instructions

Quick Learn Method:
IMPORTANT: This procedure is not available when the maximum number of 4 fobs
have been programmed. If 4 key fobs are programmed to this RCDLR and this method
is attempted, the driver information center (DIC) will display, MAX FOBS LEARNED
and the programming procedure will exit.

This procedure will add key fobs. Fobs will be numbered in sequence based on when
they are programmed; if 2 fobs are currently programmed to the RCDLR, a fob programmed
using this method will be numbered as Fob 3. This procedure requires that you have a
known good key fob, a replacement key fob, and the vehicle's mechanical key.

1. The vehicle must be off.

2. Open rear compartment

3. Place a known key fob within the interior of the vehicle.

4. At the rear of the vehicle, insert the vehicle key into the rear compartment lock cylinder,
    located above the license plate and cycle the key 5 times within 5 seconds.

5. The DIC will display: READY FOR FOB X (X = fob 2, 3, or 4).

6. Place the replacement key fob in the glove box fob pocket with the buttons facing right.

7. A beep will occur and the DIC will display: READY FOR FOB X (X = fob 3 or 4) or  

8. If programming additional key fobs, repeat steps 5 and 6, or press the OFF/ACC portion
    of the ignition switch to exit programming mode. 

9. Operate the active portion of each key fob in order to verify correct system operation.

msrp $162.26
Copyright © 2019-present Replacemyremote.com All rights reserved.