2007 - 2014 Cadillac Escalade 6 Button Keyless Entry Remote w/ Remote Start - OUC60000223

Dealer price: $299.25

Your price: $82.99

You Save: $216.26

That's 72.27% OFF dealer price!

In stock
2007 - 2014 Cadillac Escalade 6 Button Keyless Entry Remote w/ Remote Start - OUC60000223

2007 - 2014 Cadillac Escalade 6 Button Keyless Entry Remote w/ Remote Start - OUC60000223

Fits:

2008 - 2013 Cadillac Escalade

Product Specs and Programming Information
SKU 539
FCC Number OUC60000223
OE Part # 20802901
Support Your purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee! If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming Information MOST models come with self programming instructions. You can view them under the 'Programming Instructions' tab. This information is also in your Owners Manual in the Drivers Information Center Section.
Product Condition Refurbished
Programming Instructions

2008 Cadillac Escalade

Use this Procedure for Vehicles with
Driver Information Center Buttons

This information is in your Owners Manual in the
Drivers Information Center Section.

1. Insert Key and turn to ON position so you can access Driver Information Center

2. Press the vehicle information button until
    PRESS TO RELEARN REMOTE KEY displays 

3. Press the set/reset button until
    REMOTE KEY LEARNING ACTIVE  displays

4.  Press and hold the lock and unlock buttons on the first keyless remote at the same
     time for approximatley 15 seconds. A chime will sound indicating that the remote is 
     programmed.


5.  To program additional remotes at this time repeat step 4.
      T
his vehicle can have a maximum of eight remotes programmed.

6.  To exit programming mode turn key off and remove key.
     Test remote(s).



Use this Procedure for Vehicles without
Drivers Information Center Buttons

To access this display, the vehicle must be in Park (P) with key in the on position (as far
    as you can go without cranking engine)

1. Press the trip odometer reset stem until RELEARN REMOTE KEY displays. 

2. Press and hold the trip odometer reset stem for three seconds.
    The message  REMOTE KEY LEARNING ACTIVE  will display 

3.  Press and hold the lock and unlock buttons on the first keyless remote at the same
     time for approximately 15 seconds. A chime
will sound indicating that the remote is 
     programmed.

4.  To program additional remotes at this time repeat step 3.
    
This vehicle can have a maximum of eight remotes programmed.

5.  To exit programming mode turn key off and remove key.
    
Test remote(s).


2009-2010 Cadillac Escalade

 

This information is in your Owners Manual in the
Drivers Information Center Section.

 

1. Insert Key and turn to ON position so you can access Driver Information Center

2. Press the vehicle information button until
    PRESS TO RELEARN REMOTE KEY displays 

3. Press the set/reset button until
    REMOTE KEY LEARNING ACTIVE  displays

4.  Press and hold the lock and unlock buttons on the first keyless remote at the same
     time for approximatley 15 seconds. (On vehicles with memory recall seats, the first
     remote learned with match driver 1 and the second will match driver 2.)

 

     A chime will sound indicating that the remote is programmed.

5.  To program additional remotes at this time repeat step 4.
      T
his vehicle can have a maximum of eight remotes programmed.

 

6.  To exit programming mode turn key off and remove key.
     Test remote(s).




msrp $299.25
Copyright © 2019-present Replacemyremote.com All rights reserved.