2007 - 2017 OEM GM 4 Button Keyless Entry Remote w/o Remote Start (Liftgate) - OUC60270, OUC60221

Your price: $47.99

In stock
2007 - 2017 OEM GM 4 Button Keyless Entry Remote w/o Remote Start (Liftgate) - OUC60270, OUC60221

2007 - 2017 OEM GM 4 Button Keyless Entry Remote w/o Remote Start (Liftgate) - OUC60270, OUC60221

Fits:

2008 - 2017 Buick Enclave
2007 - 2010 Cadillac Escalade
2007 - 2011 Chevrolet Avalanche
2007 - 2009 Chevrolet Silverado
2007 - 2011 Chevrolet Suburban
2007 - 2011 Chevrolet Tahoe
2007 - 2017 Chevrolet Traverse
2007 - 2016 GMC Acadia
2007 - 2009 GMC Sierra
2008 - 2011 GMC Yukon
2007 - 2010 Saturn Outlook
2009 - 2010 Saturn Vue

Product Specs and Programming Information
SKU 929
FCC Number OUC60270, OUC60221
OE Part # 22756460, 15194382, 20869054, 15913416, 15857835, 22951508
Support Your purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee! If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming Information SOME models/years come with self programming instructions. You can view them under the 'Programming Instructions' tab. All other models/years will need an automotive locksmith to come out and program the unit in for you. NOTE: When looking under the 'Programming Instructions' tab please look for your specific model AND year as the programming instructions vary.
Product Condition Refurbished
Programming Instructions

2008 - 2010 Buick Enclave
2007 - 2010 Cadillac Escalade
2007 - 2010Chevrolet Avalanche
2007 - 2009 Chevrolet Silverado
2007 - 2010 Chevrolet Suburban
2007 - 2010 Chevrolet Tahoe
2009 - 2010 Chevrolet Traverse
2007 - 2010 GMC Acadia
2007 - 2009 GMC Sierra
2008 - 2010 GMC Yukon
2007 - 2010 Saturn Outlook

Use this Procedure for Vehicles with
Driver Information Center Buttons

This information is in your Owners Manual in the
Drivers Information Center Section.

1. Insert Key and turn to ON position so you can access Driver Information Center

2. Press the vehicle information button until
    PRESS TO RELEARN REMOTE KEY displays 

3. Press the set/reset button until
    REMOTE KEY LEARNING ACTIVE  displays

4.  Press and hold the lock and unlock buttons on the keyless remote at the same
     time for approximatley 15 seconds. A chime will sound indicating that the remote is 
     programmed.

5.  To program additional remotes at this time repeat step 4.
      This vehicle can have a maximum of eight remotes programmed.

6.  To exit programming mode turn key off and remove key.
     Test remote(s).



Use this Procedure for Vehicles without
Drivers Information Center Buttons

To access this display, the vehicle must be in Park (P) with key in the on position (as far
    as you can go without cranking engine)

1. Press the trip odometer reset stem until RELEARN REMOTE KEY displays. 

2. Press and hold the trip odometer reset stem for three seconds.
    The message  REMOTE KEY LEARNING ACTIVE  will display 

3.  Press and hold the lock and unlock buttons on the first keyless remote at the same
     time for approximately 15 seconds. A chime
will sound indicating that the remote is 
     programmed.

4.  To program additional remotes at this time repeat step 3.
    
This vehicle can have a maximum of eight remotes programmed.

5.  To exit programming mode turn key off and remove key.
    
Test remote(s).



Copyright © 2018-present Replacemyremote.com All rights reserved.