2009 - 2011 Buick/Chevrolet/GMC 3 Button Keyless Entry Remote Fob - M3N5WY8109

2009 - 2011 Buick/Chevrolet/GMC 3 Button Keyless Entry Remote Fob - M3N5WY8109

2009 - 2011 Buick/Chevrolet/GMC 3 Button Keyless Entry Remote Fob - M3N5WY8109

2009 - 2011 Buick/Chevrolet/GMC 3 Button Keyless Entry Remote Fob - M3N5WY8109
Your Price $37.99
Availability: In stock
SKU
510

2009 - 2011 Buick/Chevrolet/GMC 3 Button Keyless Entry Remote Fob - M3N5WY8109
 

Fits:

2009 - 2011 Buick Enclave  
2009 - 2011 Chevrolet Traverse
2009 - 2011 GMC Acadia 

Following vehicles can be self programmed:

2009-2010 Buick Enclave

2009-2010 Chevy Traverse

2009-2010 GMC Acadia

 

More Information
SKU510
FCC NumberM3N5WY8109
OE Part #25836192
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee!If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming InformationSOME models come with self programming instructions. You can view them under the 'Programming Instructions' tab.
Product ConditionRefurbished
Programming Instructions

2009-2010 Buick Enclave

2009-2010 Chevy Traverse 

Use this Procedure for Vehicles with
Driver Information Center Buttons

This information is in your Owners Manual in the
Drivers Information Center Section.

1. Insert Key and turn to ON position so you can access Driver Information Center

2. Press the vehicle information button until
    PRESS TO RELEARN REMOTE KEY displays 

3. Press the set/reset button until
    REMOTE KEY LEARNING ACTIVE  displays

4.  Press and hold the lock and unlock buttons on the keyless remote at the same
     time for approximatley 15 seconds. A chime will sound indicating that the remote is 
     programmed.

5.  To program additional remotes at this time repeat step 4.
      This vehicle can have a maximum of eight remotes programmed.

6.  To exit programming mode turn key off and remove key.
     Test remote(s).



Use this Procedure for Vehicles without
Drivers Information Center Buttons

To access this display, the vehicle must be in Park (P) with key in the on position (as far
    as you can go without cranking engine)

1. Press the trip odometer reset stem until RELEARN REMOTE KEY displays. 

2. Press and hold the trip odometer reset stem for three seconds.
    The message  REMOTE KEY LEARNING ACTIVE  will display 

3.  Press and hold the lock and unlock buttons on the first keyless remote at the same
     time for approximately 15 seconds. A chime will sound indicating that the remote is 
     programmed.

4.  To program additional remotes at this time repeat step 3.
     This vehicle can have a maximum of eight remotes programmed.

5.  To exit programming mode turn key off and remove key.
     Test remote(s).


2009-2010 GMC Acadia

This information is in your Owners Manual in the
Drivers Information Center Section.

1. Insert Key and turn to ON position so you can access Driver Information Center

2. Press the vehicle information button until
PRESS TO RELEARN REMOTE KEY displays

3. Press the set/reset button until
REMOTE KEY LEARNING ACTIVEdisplays

4. Press and hold the lock and unlock buttons on the first keyless remote at the same
time for approximatley 15 seconds. A chime will sound indicating that the remote is
programmed.

On vehicles with memory recall seats, the first remote learned will match Driver 1
and the second will match Driver 2.

5.To program additional remotes at this time repeat step 3.
This vehicle can have a maximum of eight remotes programmed.

6.To exit programming mode turn key off and remove key.
Test remote(s).