Enter Your Email Address For

An Instant $5.00 OFF Coupon!

Find My Remote or Key Now!

2014 - 2015 Chevrolet Corvette 6 Button Smart Remote w/ Drop Top, Trunk, & Remote Start - Emergency key included - G09C04EEC5C

Availability: Out of stock

Dealer Price: $349.98

$149.99

You Save: $199.99

That's 57.14% OFF Dealer price!

this link

2-Years Extended Warranty Plan

Replace My Remote offers an optional Extended 2-Year warranty on all remote and remote key products for Only $7.99. You can view the full terms and coverage of the warranty by clicking the  blue "View All Terms" link. Simply check the "Warranty" check box to add the 2 year extended warranty to your product.

Out of stock

This is an authentic factory/OEM device meant to operate your specific vehicle.

57.14%
off

2014 - 2015 Chevrolet Corvette 6 Button Smart Remote w/ Drop Top, Trunk, & Remote Start - Emergency key included - G09C04EEC5C

More Views

2014 - 2015 Chevrolet Corvette 6 Button Smart Remote w/ Drop Top, Trunk, & Remote Start - Emergency key included - G09C04EEC5C

Ekey - 459

Fits:

2014 - 2015 Chevrolet Corvette

Additional Information

SKU 3234
FCC Number G09C04EEC5C
OE Part # 22816266
Support Your purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee! If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further info
Programming Information Please click on the "Programming Instructions" tab above to view the steps to program this remote/key to your Corvette.
Product Condition Refurbished
Manufacturer's Suggested Retail Price $349.98

Programming with a Recognized Transmitter

 

A new transmitter can be programmed to the vehicle when there is one recognized transmitter.

 

1. The vehicle must be off and both the recognized and new transmitters must be with you.

2. Remove the key base from the recognized RKE transmitter.

3. Place the recognized transmitter in the cup holder.

4. Insert the vehicle key into the key cylinder above the license plate.

5. Open the hatch/trunk.

6. Turn the key five times within 10 seconds.

7. The DIC displays READY FOR REMOTE # 3 or 4, up to 8.

8. Place the new transmitter in the steering column transmitter pocket with the buttons facing up and the base toward the opening facing the passenger side.

9. Press the ENGINE START/STOP button.

10. The DIC displays READY FOR REMOTE # 4 or 5, up to 8.

11. Press K on each newly programmed transmitter to complete the process.

12. To program additional transmitters, repeat Steps 8–

13. Press and hold the ENGINE START/STOP button for 12 seconds if programming is complete. Return the key base back into the RKE transmitter.

 

Programming without a Recognized Transmitter

 

If there are no currently recognized transmitters available, follow this procedure to program up to eight transmitters. This feature is not available in Canada. This procedure will take approximately 30 minutes to complete. The vehicle must be off and all transmitters to be programmed must be present.

 

1. The vehicle must be off.

2. Remove the key from the transmitter and insert the vehicle key into the key cylinder above the license plate.

3. Open the hatch/trunk.

4. Turn the key five times within 10 seconds. The DIC message displays REMOTE LEARN PENDING PLEASE WAIT.

5. Return key base back into the RKE transmitter.

6. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN, then press the ENGINE START/STOP button. The DIC reads REMOTE LEARN PENDING, PLEASE WAIT.

7. Repeat Step 6 two additional times. After the third time all previously known transmitters will no longer work with the vehicle. Remaining transmitters can be relearned during the next steps. The DIC display should now show READY FOR REMOTE #1.

8. Place the new transmitter in the steering column transmitter pocket with the buttons facing up and the base toward the opening facing the passenger side.

9. Press the ENGINE START/STOP button. When the transmitter is learned, the DIC display will show that it is ready to program the new transmitter.

10. Remove the transmitter from the transmitter pocket and press Q or K on the transmitter. To program additional transmitters, repeat Steps 9–10. When all additional transmitters are programmed, press and hold the ENGINE START/STOP button for approximately 12 seconds to exit programming mode.

Customer Reviews of Our Service
Please Note: Reviews about self-programming do not indicate the product above is self-programmable. Please inquire about each product.
Back up
1
Get Your Coupon Now for
3% Off Your Purchase!
Receive a 3% Off Coupon Code in Your email within just minutes by simply signing up for our Newsletter. Then, just apply the coupon code at checkout for Your Savings.