1999 - 2005 Replacement Chrysler/Dodge/Plymouth 3 Button Keyless Entry Remote Fob - GQ43VT17T

1999 - 2005 Replacement Chrysler/Dodge/Plymouth 3 Button Keyless Entry Remote Fob - GQ43VT17T

Dealer Price $72.99 Your Price $32.09 You save $40.9 That's 56.04% OFF dealer price!
Availability: In stock
SKU
578-A
  • Buy 2 for $28.88 each and save 10%
  • Buy 3 for $27.28 each and save 15%

1999 - 2005 Replacement Chrysler/Dodge/Plymouth 3 Button Keyless Entry Remote Fob - GQ43VT17T

Fits:

1999 - 2003 Chrysler Town & Country
2001 - 2004 Dodge Dakota
1999 - 2002 Dodge Caravan
2001 - 2003 Dodge Durango
2001 - 2003 Dodge Grand Carvan
2003 - 2005 Dodge Ram 1500
2003 - 2005 Dodge Ram 2500
2003 - 2005 Dodge Ram 3500
1999 - 2002 Plymouth Voyager (2001-2002 NOT self programmable)

180 Day Satisfaction Guarantee!

If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further information.

 

More Information
SKU578-A
FCC NumberGQ43VT17T
OE Part #04686481AA, 04686481AB, 04686481AC, 04686481AD, 04686481AE, 04686481AF
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
Programming InformationMOST models come with self programming instructions. You can view them under the 'Programming Instructions' tab. YOU MUST HAVE A WORKING REMOTE FOR THIS PROCEDURE TO WORK.
Product ConditionNew Aftermarket
Programming Instructions

1999 - 2003 Chrysler Town & Country
2001 - 2004 Dodge Dakota
1999 - 2002 Dodge Caravan
2001 - 2003 Dodge Durango
2003 - 2004 Dodge Ram 1500
2003 - 2004 Dodge Ram 2500
2003 - 2004 Dodge Ram 3500
1999 - 2000 Plymouth Voyager


YOU MUST HAVE A WORKING REMOTE FOR THIS PROCEDURE TO WORK. IF YOU DON'T HAVE A WORKING REMOTE THEN YOU MUST HAVE A REMOTE PROGRAMMED BY A DEALER OR LOCKSMITH USING DIAGNOSTIC EQUIPMENT.

PLEASE READ ENTIRE PROCEDURE BEFORE PERFORMING. SOME VEHICLES MAY USE ONE OF TWO PROCEDURES. IF PROCEDURE 1. DOES NOT WORK THEN PLEASE USE PROCEDURE 2.

 

Programming procedure #1.

Obtain all remote transmitters for this vehicle.


1. Put key in ignition and turn ignition switch to ON position (as far as you can turn key without cranking engine).


2. Press and hold UNLOCK on a currently functioning remote for 4 to 10 seconds.


3. While holding the UNLOCK button during the 4 to 10 second period, press the panic button for one second and release both buttons at the same time. A chime should sound within three seconds to indicate the vehicle has entered programming mode.


4. Press any button on the remote used in step 3. You should hear an audible tone indicating that remote has been re-programmed. This step must be done within 30 seconds of hearing first chime in step 3.


5. Within 30 seconds of completiong step 4. press any button on the next remote. Repeat step 5. for all additional remotes including working remotes.


6. Programming is now complete. Turn ignition off and test remotes to ensure proper programming.

 

Programming Procedure #2

Obtain all remote transmitters for this vehicle.


1. Put key in ignition and turn ignition switch to ON position (as far as you can turn key without cranking engine).


2. Press and hold UNLOCK on a currently functioning remote for 4 to 10 seconds.


3. While holding the UNLOCK button during the 4 to 10 second period, press the panic button for one second and release both buttons at the same time. A chime should sound within three seconds to indicate the vehicle has entered programming mode.


4. Press the LOCK and UNLOCK buttons simultaneously on the same remote used in step 3. then release. You should hear an audible tone indicating that the remote was recognized. Once tone is heard press and release the UNLOCK button on that remote. A chime should sound indicating that the remote has been programmed. This must be done within 30 seconds of step 3.


5. Within 30 seconds of completing step 4. press the LOCK and UNLOCK button on the next remote then release. You should hear an audible tone indicating that the remote was recognized. Once tone is heard press and release the UNLOCK button on that remote. A chime should sound indicating that the remote has been programmed. Repeat step 5. for all additional remotes including working remotes.


6. Programming is now complete. Turn ignition off and test remotes to ensure proper programming.


Plymouth Voyager 2001-2002 is NOT self programmable!

msrp72.99