Enter Your Email Address For

An Instant $5.00 OFF Coupon!

Find My Remote or Key Now!

1999 - 2004 Subaru 2 Button Keyless Entry Remote Fob - A269ZUA111

Availability: In stock

Dealer Price: $101.21


You Save: $50.72

That's 50.11% OFF Dealer price!

this link

2-Years Extended Warranty Plan

Replace My Remote offers an optional Extended 2-Year warranty on all remote and remote key products for Only $7.99. You can view the full terms and coverage of the warranty by clicking the  blue "View All Terms" link. Simply check the "Warranty" check box to add the 2 year extended warranty to your product.

This is an authentic factory/OEM device meant to operate your specific vehicle.


1999 - 2004 Subaru 2 Button Keyless Entry Remote Fob - A269ZUA111

More Views

1999 - 2004 Subaru 2 Button Keyless Entry Remote Fob - A269ZUA111


2001 - 2003 Subaru Forester
1999 - 2004 Subaru Impreza
2000 - 2003 Subaru Legacy
1999 - 2004 Subaru Outback

Additional Information

SKU 2554
FCC Number A269ZUA111
OE Part # 88035AC230
Support Your purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee! If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further info
Programming Information This remote comes with self programming instructions. You can view them under the 'Programming Instructions' tab.
Product Condition Refurbished
Manufacturer's Suggested Retail Price $101.21

2001 - 2003 Subaru Forester

2001 - 2004 Subaru Impreza

2000 - 2003 Subaru Legacy

2000 - 2004 Subaru Outback


Obtain all remote transmitters for this vehicle.

1. Sit in the vehicle in the drivers seat with all doors, trunk, and rear gate closed.

2. Open and close the drivers door.

3. Put key into ignition switch. Cycle ignition switch from OFF to ON (ON is the position just before the engine cranks) ten times as quick as can be done ending up in the lock position. This must be done within 15 seconds. When done properly you will hear the horn sound. Now the vehicle is in programming mode.

4. Open and close the drivers door.

5. Press any button on the first remote. The horn will sound two times to indicate that remote was accepted.

6. Repeat steps 4 and 5 for each additional remote that you wish to program to vehicle.

7. Remove the key from the ignition switch. Horn will sound three times to indicate that vehicle is out of programming mode. Test all programmed remotes for proper function.


1999 - 2000 Subaru Impreza

1999 Subaru Outback


1. Open the driver's door.

2. Turn the ignition key ON (ON is the position just shy of cranking the engine).

3. Press and hold the programming/override button (located under or at the bottom of the driver's side dash). In approximately 20 seconds the system will start to cycle the door locks and the siren (if equipped) 3 times to indicate the system has entered the transmitter learn mode (DO NOT RELEASE THE PROGRAMMING/OVERRIDE BUTTON).

4. Press the #1 button (top left button) on the unprogrammed transmitter. The system will respond by cycling the door locks and the siren (if equipped) one time to indicate the transmitter has been learned.

5. All other transmitters (up to four) also need to be programmed at this time.

6. Programming is now complete, let go of the programming/override button and turn ignition off to exit learn mode. Test all remotes for proper programming.

Customer Reviews of Our Service
Please Note: Reviews about self-programming do not indicate the product above is self-programmable. Please inquire about each product.
Back up
Get Your Coupon Now for
3% Off Your Purchase!
Receive a 3% Off Coupon Code in Your email within just minutes by simply signing up for our Newsletter. Then, just apply the coupon code at checkout for Your Savings.