1998 - 2002 Toyota 2 Button Keyless Entry Remote - BAB237131-022 - Gray case
Fits:
1998 - 1999 Toyota 4Runner
1998 - 1999 Toyota Avalon
1998 - 1999 Toyota Camry
1998 - 1999 Toyota Celica
1998 - 2002 Toyota Corolla
1998 Toyota Paseo
1998 - 2000 Toyota Rav4
1998 - 2000 Toyota Sienna
1999 - 2001 Toyota Solara
1998 Toyota Supra
1998 Toyota T100
1998 - 2001 Toyota Tacoma
1998 Toyota Tercel
2000 - 2002 Toyota Tundra
If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further information.
SKU | 2727 |
---|---|
FCC Number | BAB237131-022 |
OE Part # | 08191-00871 |
Support | Your purchase gives you 100% free e-mail and phone technical support from our expert staff. |
Programming Information | This remote comes with self programming instructions. You can view them under the 'Programming Instructions' tab. |
Product Condition | Refurbished |
Programming Instructions | FOR VEHICLES WITH DEALER INSTALLED KEYLESS ENTRY USE THIS PROCEDURE 1998 4Runner 1998 - 1999 Celica 1998 - 2002 Corolla 1998 Paseo 1998 - 2000 Rav4 1998 Supra 1998 T100 1998 - 2001 Tacoma 1998 Tercel 2000 - 2002 Tundra
Obtain all remote transmitters for this vehicle. 1. Insert key into ignition and turn ignition switch to ON position. 2. Locate the ECU (Engine Control Unit) and press and hold the ECU PROGRAMMING SWITCH for 3 seconds (refer to diagram for location). The ECU will be located under one of the front two seats, the trunk, or under the dashboard on the drivers side. You will see the STATUS MONITOR LED turn on for 5 seconds. Vehicle is now in programming mode. 3. Press and release either the top or bottom button on the remote. The STATUS MONITOR LED will turn off. A chirp will be heard as well as one flash of the exterior lights. 4. Turn off the ignition. Programming is now complete |
msrp | 114.21 |