Enter Your Email Address For

An Instant $5.00 OFF Coupon!

Find My Remote or Key Now!

Replace My Keyless Entry Remotes and Car Key Fobs

Replacement Keyless Entry Remotes and Fobs

  • 2007-2009 Acura MDX Remote Key Programming Information

    Acura MDX Programming Instructions

    2007-2009 Acura MDX Remote Key Programming Information

     

    1. Have your remote/key ready.

    2. Sit in the vehicle with all the doors and the trunk closed.

    3. Turn the ignition to the "ON" position, the dashboard lights will turn on.

    4. You will hear a soft clicking sound. Within 5 seconds hold the “Lock” button on the remote for about 1 second.

    5. Turn the ignition to the "OFF" position. The dashboard lights will turn off. If you hear a soft clicking sound, you must start everything over.

    6. Repeat these steps three more times.

    7. When you turn the ignition to the "ON" position for the 4th time, press the lock button on one of the remotes. The car door locks will make a sound. The door locks will not lock or unlock now. They would just make a noise. The vehicle's system is now in programming mode. Do not turn key off. Press the lock button 2 more times then press unlock.

    8. Turn ignition completely off and remove the key.

    9. Remove yourself from the vehicle. The remotes should now function. If you have a trunk release, you will need to press the button for a couple seconds for it to open.

     

    Special Notes:

    Each step in the instructions must be executed in 5 seconds or less for the programming to be successful.

    Please click here to locate a professional automotive locksmith in your area if you are unable to successfully program this remote.

  • Review of the BMW 1 Series

    IMG_1282

    So let's talk about the BMW 1 Series!

    Given BMW's history of using lower numbers to denote lower trim package specs one would imagine the 1 Series is barely above a horse and carriage, right? Let me be the first to tell you- from experience mind you because I own a 135iM now and used to own a 128i- the 1 Series kicks major ass!

    Top Gears Jeremy Clarkson called the 1M "perfect", and while I tend to agree with him on this, "perfect" is only an accurate description on the performance. As far as trim goes, it is indeed a bit sparse. Under the hood, you will find (in the 2009 135i) a 3.0 liter in line 6 cylinder engine producing 230 horses and 200 foot pounds of torque. Rear wheel drive driven (as all non-X drive BMW's are) this 6 speed pocket rocket is fast, agile, and grips the road like nothing I have ever seen.

    At least, like nothing else I ever saw until I drove the 2011 135i with the premium M sport package. With the M chip installed the limiter was removed. No more USA cap at 155! With M wheels, M trim, M suspension, and a few more M driven modifications this beast was one step down from a real 1M. Horsepower was cranked up to 332- 30 more given by the M chip! Torque was increased to over 300 foot pounds! I had to buckle in tight as the car crushes you into its leather seats from sheer power acceleration. Traction control has to be turned off, lest the car convulse itself as the power sheers the rubber from the road and the computer fights the engine! The twin turbo is replaced with a HUGE single turbo that you can HEAR wind up over 3500rpm's, like some 20 year old kid's modded out RX8!

    Let's get back to that spartan interior, shall we? Spartan is kind of unfair. The car has a great sound system (single CD/radio/XM )with 6 speakers. Most models come with heated seats, all with leather seats. The dash can have a touch of the "classic" 80's feel about it- right down to the full on amber lighting- but I can live with that since my car also has the "all weather package". This upgrade gives the car headlight washers and a heated steering wheel- except my car also has the M steering wheel which DOES NOT allow for the heater elements. It is a thicker steering wheel, smaller and more aggressive. A fair trade. Electric seats are standard as well windows and locks.

    Looking for an all out beast of a car with more power than you know what to do with? The 135 line will hook you right up!

    reviewed by: Jeff Murray/ PA, USA

  • 2002 Nissan Altima Keyless Remote Programming Instructions

    2002 Nissan Altima Remote Programming

    1. Close and lock all the vehicle doors with the driver's side power lock / unlock switch located on driver’s door panel.

    2. Insert the key into ignition and remove it from the ignition key cylinder at least 6 times within 10 seconds. Your hazard lamps will flash if you have performed this step successfully.

    3. PLEASE NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed to fast, system will not enter programming mode.

    4. Insert the key into ignition and turn to the ACC position.

    5. Within 5 seconds, push any button on the keyless remote. Your hazard lamps should flash.

    6. NOTE: Do not press the button on the remote more than one time or the programming will not be successful.

    7. If there are any remaining remotes, including the old ones, unlock then lock all doors using the switch on driver’s door panel and within 5 seconds press any button on the next remote. Your hazard lamps should flash. You should repeat this step for each additional remote including any current existing remotes.

    8. Turn the key to the off position then remove the key from the ignition. Unlock the door using the switch on door panel then open driver’s door.

    9. Test remote all remotes.

    Please click here to locate a professional automotive locksmith in your area if you are unable to successfully program this remote.

  • 2000 - 2011 Ford Focus Keyless Remote Programming Instructions

    Ford-Focus

    1. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode.

    2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.

    3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.

    4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

    Please click here to locate a professional automotive locksmith in your area if you are unable to successfully program this remote.

  • 2004 - 2006 Buick Rainier Keyless Entry Remote Programming Instructions

    2005-buick-rainier-cxl_100030639_m

    1. Close all the vehicle doors.
    2. Insert the key into the ignition.
    3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release in step 9.
    4. Perform steps 5 through 8 in fairly rapid succession.
    5. Turn the ignition switch to the ON position without starting the engine
    6. Turn the ignition switch to the OFF position.
    7. Turn the ignition switch to the ON position.
    8. Turn the ignition switch to the OFF position.
    9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
    10. Hold down the LOCK and UNLOCK buttons on the keyless remote simultaneously until the door locks and unlocks. This may take 30 - 45 seconds.
    11. Repeat step 10 for ALL additional keyless remotes.
    12. Turn the ignition switch to the ON position in order to exit the keyless remote programming mode.

    Please click here to locate a professional automotive locksmith in your area if you are unable to successfully program this remote.

  • 2013 Acura TL Keyless Remote Programming Instructions

    fa7420660a0d028a00ef9525ace1f7a4

    There are no self-programming instructions or methods for this vehicle. You will need to contact a local automotive locksmith to program the keyless remote to this vehicle.

    Please click here to locate a professional automotive locksmith in your area.

  • 2012 Kia Rio Keyless Remote Programming Instructions

    Kia-Rio-2012-exterior

    There are no self-programming instructions or methods for this vehicle. You will need to contact a local automotive locksmith to program the keyless remote to this vehicle.

    Please click here to locate a professional automotive locksmith in your area.

  • Kia Soul 2010 Keyless Remote Programming Instructions

    2010_kia_soul_image

    There are no self-programming instructions or methods for this vehicle. You will need to contact a local automotive locksmith to program the keyless remote to this vehicle.

    Please click here to locate a professional automotive locksmith in your area.

8 Item(s)

1