Enter Your Email Address For

An Instant $5.00 OFF Coupon!


Find My Remote or Key Now !

2014 - 2016 Cadillac Smart Remote w/ Trunk - Emergency key included - HYQ2AB

Availability: In stock

Ships today if ordered in the next 1 hour and 54 minutes!

Dealer Price: $349.96

$115.00

You Save: $234.96

That's 67.14% OFF Dealer price!

Dealer Price: $349.96

$115.00

You Save: $234.96

That's 67.14% OFF Dealer price!

this link

2-Years Extended Warranty Plan

Replace My Remote offers an optional Extended 2-Year warranty on all remote and remote key products for Only $7.99. You can view the full terms and coverage of the warranty by clicking the  blue "View All Terms" link. Simply check the "Warranty" check box to add the 2 year extended warranty to your product.

This is an authentic factory/OEM device meant to operate your specific vehicle.

67.14%
off

2014 - 2016 Cadillac Smart Remote w/ Trunk - Emergency key included - HYQ2AB

More Views

2014 - 2016 Cadillac Smart Remote w/ Trunk - Emergency key included - HYQ2AB

*IMPORTANT* Please verify the Mhz on the back of your remote as the one you purchase and the one you currently have need to match. 

Ekey: 7275

Fits:

2015 - 2016 Cadillac ATS
2014 - 2016 Cadillac CTS
2015 - 2016 Cadillac XTS

Additional Information

SKU 1864
FCC Number HYQ2AB
OE Part # N13580811
Support Your purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee! If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further info
Programming Information This remote comes with self programming instructions. You can view them under the 'Programming Instructions' tab.
Product Condition Refurbished
Manufacturer's Suggested Retail Price $349.96

Programming with a Recognized
Transmitter

A new transmitter can be
programmed to the vehicle when
there is one recognized transmitter.
To program, the vehicle must be off
and all transmitters, both currently
recognized and new, must be
with you.

1. Remove the vehicle key from
the recognized transmitter.

2. Place the recognized
transmitter(s) in the cupholder.

3. Remove the key lock cylinder
cap on the driver door handle.
See Door Locks 0 37. Insert
the vehicle key into the key
lock cylinder on the driver door
handle, then turn the key
counterclockwise to the unlock
position five times within
10 seconds.
The Driver Information Center
(DIC) displays READY FOR
REMOTE #2, 3, 4, ETC.

4. Place the new transmitter into
the transmitter pocket. The
center console storage area
will need to be opened and the
rubber mat needs to be
removed to access the
transmitter pocket.

5. Press the ENGINE START/
STOP button. When the
transmitter is learned, the DIC
display will show that it is ready
to program the next transmitter.

6. Remove the transmitter from
the transmitter pocket and
press K or Q on the
transmitter.

To program additional
transmitters, repeat Steps 4–6.
When all additional transmitters
are programmed, press and
hold the ENGINE START/
STOP button for approximately
12 seconds to exit
programming mode.

7. Return the vehicle key back
into the transmitter.


Programming without a
Recognized Transmitter

If there are no currently recognized
transmitters available, follow this
procedure to program up to eight
transmitters. This feature is not
available in Canada. This procedure
will take approximately 30 minutes
to complete. The vehicle must be off
and all transmitters to be
programmed must be with you.

1. Remove the vehicle key from
the transmitter.

2. Remove the key lock cylinder
cap on the driver door handle.
See Door Locks 0 37. Insert
the vehicle key into the key
lock cylinder on the driver door
handle, then turn the key
counterclockwise to the unlock
position five times within
10 seconds.
The Driver Information Center
(DIC) displays REMOTE
LEARN PENDING,
PLEASE WAIT.

3. Wait for 10 minutes until the
DIC displays PRESS ENGINE
START BUTTON TO LEARN
and then press the ENGINE
START/STOP button.
The DIC display will again
show REMOTE LEARN
PENDING, PLEASE WAIT.

4. Repeat Step 3 two additional
times. After the third time all
previously known transmitters
will no longer work with the
vehicle. Remaining transmitters
can be relearned during the
next steps.
The DIC display should now
show READY FOR REMOTE
# 1.

5. Place the new transmitter in
the transmitter pocket. The
center console storage area
will need to be opened and the
rubber mat needs to be
removed to access the
transmitter pocket.

6. Press the ENGINE START/
STOP button. When the
transmitter is learned, the DIC
display will show that it is ready
to program the next transmitter.

7. Remove the transmitter from
the transmitter pocket and
press K or Q on the
transmitter.

To program additional
transmitters, repeat Steps 5–7.

When all additional transmitters
are programmed, press and
hold the ENGINE START/
STOP button for approximately
12 seconds to exit
programming mode.

8. Return the vehicle key back
into the transmitter.

Customer Reviews of Our Service
Please Note: Reviews about self-programming do not indicate the product above is self-programmable. Please inquire about each product.
Back up
1