2004 - 2016 OEM Chrysler, Dodge, Jeep 3 Button Remote Head Key - OHT692427AA/OHT692713AA
2004 - 2016 OEM Chrysler, Dodge, Jeep 3 Button Remote Head Key - OHT692427AA - OHT692713AA
2006 - 2010 Chrysler PT Cruiser
2007 - 2009 Chrysler Aspen
2007 - 2012 Dodge Nitro
2007 - 2012 Dodge Caliber
2004 - 2008 Dodge Durango
2005 - 2007 Dodge Magnum
2006 - 2008 Dodge Ram
2007 - 2015 Jeep Wrangler
2007 - 2016 Jeep Compass
2007 - 2016 Jeep Patriot
|FCC Number||OHT692427AA - OHT692713AA|
|OE Part #||68003659AA, 05175817AA, 05175789AA, 05183683AA, 05183683AC, 68001705AB, 05175786AA|
|Support||Your purchase gives you 100% free e-mail and phone technical support from our expert staff.|
|180 Day Satisfaction Guarantee!||If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further info|
|Programming Information||SOME models come with self programming instructions. You can view them under the 'Programming Instructions' tab. All other models will need an automotive locksmith to come out and program the unit in for you. NOTE: When looking under the 'Programming Instructions' tab please look for your specific model as the programming instructions vary.|
|Manufacturer's Suggested Retail Price||$246.95|
Have all keys for the Dodge/Chrysler/Jeep ready – You must have two working programmed or original keys to use this procedure
*** 2010+ VEHICLES MUST BE PROGRAMMED BY AN AUTOMOTIVE LOCKSMITH ***
***If ignition recall was performed on your vehicle, the DIY programming won’t be available***
ATTENTION DODGE RAM OWNERS: Some 2009 and up DODGE RAM’S may require dealer programming. If you have a 2009 DODGE RAM, please contact your local dealership to see if your vehicle requires dealer programming.
1. Insert first programmed key into the ignition and turn ignition switch to ON. Wait for approximately 3 seconds then turn ignition to OFF and remove key.
2. Within 15 seconds of removing first key insert second programmed key into ignition and turn ignition switch to ON. Wait approximately 10 seconds. You will see the immobilizer warning lamp illuminate on the dash and you will hear an audible tone.Turn ignition OFF and remove the key.
3. Within 50 seconds insert the new unprogrammed key into ignition. Turn ignition switch to ON. After approximately 10 secondsyou should hear an audible tone and the immobilizer lamp will remain illuminated for 3 seconds. Once this occurs programming is completed.
4. For each additional key you must repeat these steps starting with step number 1.
Customer Reviews of Our Service
Please Note: Reviews about self-programming do not indicate the product above is self-programmable. Please inquire about each product.