2009 - 2013 Dodge 4 Button Non-Prox Fobik Key - Emergency key included - IYZ-C01C

Your Price $78.10
Availability: In stock
SKU
663MTO

2009 - 2013 Dodge 4 Button Non-Prox Fobik Key - Emergency key included - IYZ-C01C

*This non-prox remote is not for a push-button-start vehicle*

Fits:   

2009 - 2013 Dodge Challenger
2009 - 2013 Dodge Charger
2008 Dodge Magnum

 


2011 - 2013 Dodge Challenger is NOT self programmable
2011 - 2013 Dodge Charger is NOT self programmable

180 Day Satisfaction Guarantee!

If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further information.

 

More Information
SKU663MTO
FCC NumberIYZ-C01C
OE Part #68044059AA, 05026315AC, 68040590AA
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
Programming InformationOnly SOME models come with self programming instructions. You can view them under the 'Programming Instructions' tab. YOU MUST HAVE TWO WORKING FOBIX REMOTES TO USE THIS PROCEDURE.
Product ConditionRefurbished
Programming Instructions

2009 - 2010 Dodge Challenger ONLY
2009 - 2010 Dodge Charger ONLY
2008 Dodge Magnum

Obtain all remote transmitters for this vehicle.

THIS PROCEDURE FOR FOBIX KEY

YOU MUST HAVE TWO WORKING FOBIX REMOTES TO USE THIS PROCEDURE

 

1. Insert first programmed key into ignition switch.

 

2. Switch ignition ON for at least 3 seconds but no longer than 15 seconds.

 

3. Turn ignition OFF and remove key.

 

4. Within 15 seconds insert second programmed key into ignition switch and turn ignition ON.

 

5. After 10 seconds an audible tone will be heard and immobilizer warning lamp will flash.

 

6. Turn ignition OFF and remove second programmed key.

 

7. Within 60 seconds insert non-programmed key into ignition switch and turn ignition ON.

 

8. After 10 seconds an audible tone will be heard and immobilizer warning lamp will illuminate for 3 seconds.

 

9. Switch ignition OFF.

 

10. Remove key.

 

11. Check operation of programmed key transmitter.

 

12. Repeat procedure for additional key transmitters if required (up to 8 key transmitters can be programmed).