1993 - 1996 Nissan/Infiniti 4 Button Keyless Entry Remote Fob - A269ZUA073, A269ZJA073

1994

Obtain all remote transmitters for this vehicle.

1. Ensure that the hood and trunk are closed. Sit in vehicle and close all doors.

2. Set the Alarm Console switch to the ALARM OFF position.

3. Insert key into ignition switch. Cycle key to ON and then back to OFF six times within ten seconds ensuring to end up in the OFF position.

4. Set the Alarm Console switch to the AUTO position and then set back to the ALARM OFF position.

5. Press the Unlock button on the first remote to be programmed once.

6. For any remaining remotes including old ones repeat step 5 for each remote.

7. Programming is now complete. Open door and test all remotes to ensure proper programming.

1995

1. Open trunk enter vehicle and close all doors and lock them

2. Insert key and remove key from ignition 6-8 times within ten seconds. Do not turn the key in the ignition.

3. Unlock and Lock the driver's door by hand, do not use power locks.

4. Press lock button on the remote being programmed. Repeat for additional remotes.

5. Unlock drivers door by hand, open and close door to exit programming


1993 & 1996

Obtain all remote transmitters for this vehicle.

1. Open the trunk, sit in vehicle and close and Lock all doors.

2. Insert key into ignition and fully remove from ignition at least six times in 10 seconds. If you are having problems try varying the speed in which you put the key in and out of the ignition.

3. Manually Unlock and then Lock the driver's door using the knob on the door.

4. Press the LOCK button on the first remote to be programmed within 5 seconds of completing step 3.

5. To program additional remotes repeat step 3 and 4 for each remote. You can program up to 4 remotes to this vehicle.

6. Programming is now complete. Unlock driver's door manually using the door lock knob and open then close door.

7. Test all remotes to ensure proper programming.