1993 - 2000 Ford/Lincoln/Mercury 3 Button Keyless Entry Remote Fob - GQ43VT4T

1993 - 2000 Ford/Lincoln/Mercury 3 Button Keyless Entry Remote Fob - GQ43VT4T

1993 - 2000 Ford/Lincoln/Mercury 3 Button Keyless Entry Remote Fob - GQ43VT4T

1993 - 2000 Ford/Lincoln/Mercury 3 Button Keyless Entry Remote Fob - GQ43VT4T
Dealer Price $69.99 Your Price $27.99 You save $42 That's 60.01% OFF dealer price!
Availability: In stock
SKU
756

1993 - 2000 Ford/Lincoln/Mercury 3 Button Keyless Entry Remote Fob - GQ43VT4T

Fits:

1995 - 1997 Ford Bronco
1993 - 1997 Ford Club Bronco
1995 - 2000 Ford Contour
1993 - 1999 Ford E-150 Econoline
1993 - 1997 Ford Explorer
1997 - 1997 Ford Expedition
1995 - 1997 Ford Ranger
1993 - 1997 Ford F-Series
1995 - 1998 Ford Windstar
1997 - 1997 Lincoln Navigator
1996 - 1997 Mercury Mountaineer

More Information
SKU756
FCC NumberGQ43VT4T
OE Part #3165189
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee!If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming InformationThis remote comes with self programming instructions. You can view them under the 'Programming Instructions' tab.
Product ConditionRefurbished
Programming Instructions

Programming Instructions for: Ford Bronco, Ford Bronco Club

  1. Turn ignition to RUN or ACC.
  2. Momentarily jump pins in programming connector located at the base of the steering column. All doors will lock then unlock to confirm programming mode.
  3. Press any button on first keyless remote. Door locks will cycle to confirm programming.
  4. If programming a second keyless remote, press any button on second keyless remote. Door locks will cycle to confirm programming.
  5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode. 

Programming Instructions for: Ford Contour

  1. Turn ignition to RUN or ACC.
  2. Momentarily jump pins in programming connector located behind glove box. The horn will chirp to confirm programming mode.
  3. Press any button on first keyless remote. The horn will chirp to confirm programming.
  4. Press any button on second keyless remote. The horn will chirp to confirm programming.
  5. Turn ignition OFF the horn will chirp one last time to indicate end of programming mode.

Programming Instructions for: 1993 - 1998 Ford Ecoline

  1. Turn ignition to RUN or ACC.
  2. Jump pins in programming connector plug for entire programming procedure. All doors will lock then unlock to confirm programming mode. (The plug is black with two wires: white with yellow stripe and gray with yellow stripe. The plug comes out of a large harness which runs under the column at the bottom edge of the dash.)
  3. Press any button on first keyless remote. Doors locks will cycle to confirm programming.
  4. If programming second keyless remote press any button on it and door locks will cycle to confirm programming.
  5. Turn ignition to OFF. Door locks will cycle to indicate end of programming mode. 6. Remove jumper wire in programming connector.

Programming Instructions for: 1999 Ford Ecoline

If you have a 1999 Econoline that was built early in the production year use these instructions

  1. Turn ignition to RUN or ACC.
  2. Jump pins in programming connector plug for entire programming procedure. All doors will lock then unlock to confirm programming mode. (The plug is black with two wires: white with yellow stripe and gray with yellow stripe. The plug comes out of a large harness which runs under the column at the bottom edge of the dash.)
  3. Press any button on first keyless remote. Doors locks will cycle to confirm programming.
  4. If programming second keyless remote press any button on it and door locks will cycle to confirm programming.
  5. Turn ignition to OFF. Door locks will cycle to indicate end of programming mode. 6. Remove jumper wire in programming connector.

If you have a 1999 Econoline that was built in the last part of the production year use these instructions.

  1. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode.
  2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.
  3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.
  4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Programming Instructions for: Ford Explorer, Ford Expedition, Ford Ranger, Ford F-Series, Lincoln Navigator, Mercury Mountaineer

  1. Turn ignition from OFF to RUN 5 times within 10 seconds, with the 5th time ending in RUN. Door locks will cycle to confirm programming mode.
  2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.
  3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.
  4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Programming Instructions for: 1995 - 1997 Ford Windstar

  1. Turn ignition to RUN or ACC.
  2. Momentarily jump pins in programming connector located behind glove box. All doors will lock then unlock to confirm programming mode.
  3. Press any button on first keyless remote. Door locks will cycle to confirm programming.
  4. If programming a second keyless remote, press any button on second keyless remote. Door locks will cycle to confirm programming.
  5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Programming Instructions for: 1998 Ford Windstar

Use this procedure for early built 1998 Windstar

  1. Turn ignition from OFF to RUN 5 times within 10 seconds, with the 5th time ending in RUN. Door locks will cycle to confirm programming mode.
  2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.
  3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.
  4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Use this procedure for late built 1998 Windstar

  1. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode.
  2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.
  3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.
  4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.
msrp69.99