1993 - 2000 Ford/Lincoln/Mercury 4 Button Keyless Entry Remote Fob - GQ43VT4T

1993 - 2000 Ford/Lincoln/Mercury 4 Button Keyless Entry Remote Fob - GQ43VT4T

1993 - 2000 Ford/Lincoln/Mercury 4 Button Keyless Entry Remote Fob - GQ43VT4T

1993 - 2000 Ford/Lincoln/Mercury 4 Button Keyless Entry Remote Fob - GQ43VT4T
Dealer Price $89.99 Your Price $35.99 You save $54 That's 60.01% OFF dealer price!
Availability: In stock
SKU
787

1993 - 2000 Ford/Lincoln/Mercury 4 Button Keyless Entry Remote Fob - GQ43VT4T

*This remote may or may not come with a logo depending on inventory*

Fits:

1997 - 1998 Ford Escort
1993 - 1997 Ford Probe
1994 - 1998 Ford Mustang
1993 - 1997 Ford Taurus
1993 - 1997 Ford Thunderbird
1995 - 2000 Ford Contour
1993 - 1994 Ford Crown Victoria
1993 - 1994 Lincoln Continental
1993 - 1996 Lincoln Mark VIII
1993 - 1994 Lincoln Town Car
1993 - 1997 Mercury Cougar
1993 - 1994 Mercury Grand Marquis
1995 - 2000 Mercury Mystique
1993 - 1997 Mercury Sable
1997 - 1998 Mercury Tracer

More Information
SKU787
FCC NumberGQ43VT4T
OE Part #F5DZ-15K601-B, 3165189
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee!If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming InformationThis remote comes with self programming instructions. You can view them under the 'Programming Instructions' tab.
Product ConditionRefurbished
Programming Instructions

Mercury Mystique

Note: Obtain all remote transmitters for this vehicle.

  1. Enter 5-digit permanent entry code into the keyless entry keypad. (THIS WILL BE THE PERMANENT CODE GIVEN BY THE DEALERSHIP WHEN THE CAR WAS NEW. YOUR PERSONAL CODE WILL NOT WORK.)
  2. Within 5 seconds of pressing last button of code, press the 1/2 button. All doors will lock then unlock confirming you are in programming mode.
  3. Press any button on first Keyless Remote within 5 seconds of pressing the 1/2 button. Locks will cycle to indicate succesful programming.
  4. If you are programming more than one Keyless Remote (Including exsiting remotes) Press any button on second keyless remote within 5 seconds of previous remote. Locks will cycle again to indicate succesfull programming. (If the keypad light goes out before all remotes are programmed the entire process must be repeated).
  5. Press the 7/8 and the 9/0 buttons simultaneously on the keypad to exit programming.



Ford Taurus, Mercury Sable & Mercury Tracer

Note: Obtain all remote transmitters for this vehicle.

 

  1. Turn ignition from OFF to RUN 5 times within 10 seconds, with the 5th time ending in RUN. Door locks will cycle to confirm programming mode. (Off is the position where you can remove your key, RUN is the postion just shy of starting your car.)
  2. Within 20 seconds press any button on the first keyless remote to be programmed. Door locks will cycle to confirm programming. If you only have one remote then skip to step 4.
  3. Within 20 seconds, press any button on the second keyless remote. Door locks will cycle again to confirm programming. Repeat step 3. for all other remotes.
  4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode



Ford Probe, Ford Mustang, Ford Thunderbird, Ford Contour, Ford Crown Victoria, Lincoln Continental, Lincoln Mark VIII, Lincoln Town Car, Mercury Cougar, Mercury Grand Marquis

Note: Obtain all remote transmitters for this vehicle.

  1. Turn ignition to RUN or ACC. (Run is forward shy of starting car, ACC is turning the key back opposite of starting car.)
  2. Momentarily jump pins in programming connector* located in the right rear quarter panel**. All doors will lock then unlock to confirm programming mode. (*Programming connector will be 2 wires with a platic plug at the end. The plug Will NOT be connected to anything. If you look inside the plug there will be metal inside on each side of the plug. Jumping the pins means to make a connection between the metal inside the plug. You can do this by using any metal, a metal paperclip bent in the shape of a "U" usually works perfect.**You will need to look in the right rear quarter panel area to locate the programming connector. You may need to pull back some trim to find it, the exact location will vary from vehicle to vehicle. )
  3. Press any button on first keyless remote. Door locks will cycle to confirm programming.
  4. If programming a second keyless remote, press any button on second keyless remote. Door locks will cycle to confirm programming.
  5. Turn igniton to OFF. Locks will again cycle to indicate end of programming mode.



Ford Escort

Note: Obtain all remote transmitters for this vehicle.

Note: Do not depress the brake pedal during procedure.

 

  1. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode. (Off is the position where you can remove your key, RUN is the postion just shy of starting your car.)
  2. Within 20 seconds press any button on the first keyless remote to be programmed. Door locks will cycle to confirm programming. If you only have one remote then skip to step 4.
  3. Within 20 seconds, press any button on the second keyless remote. Door locks will cycle again to confirm programming. Repeat step 3. for all other remotes.
  4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

 

msrp89.99