1996 - 1998 Mercury Villager 3 Button Keyless Entry Remote - GQ43VT8T

1. Enter vehicle, close and lock all doors using power lock switch on drivers door.

2. Insert and remove (do not turn) key from ignition at least 6 times  within 10 seconds.
    Tail lamps will flash to indicate original code has been erased.

3. Insert and turn key to ACC position.

4. Press LOCK on first keyless remote. Tail lamps will flash to confirm programming.

5. To add additional remotes, unlock then lock the doors using power lock
    switch on drivers door.

6. Press LOCK button on second keyless remote. Tail lamps will flash to confirm
    programming.

7. Open drivers door, turn ignition to OFF.