If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further information.
OE Part #
Your purchase gives you 100% free e-mail and phone technical support from our expert staff.
This remote comes with self programming instructions. You can view them under the 'Programming Instructions' tab.
Obtain all remote transmitters for this vehicle. Entering programming mode erases all remotes, so all remotes must be programmed during this procedure.
Turn ignition to ON (ll). (ON is the position just shy of starting the vehicle without cranking engine)
Press and hold the valet/disarm button located between the AM/FM and CD/TAPE button as pictured below. The vehicle will respond by locking and unlocking the doors, indicating the vehicle is in programming mode. (You must continue to hold the valet button until instructed to release)
Within five seconds, press the LOCK or UNLOCK button on the remote. The vehicle will respond by locking and unlocking the doors, indicating the vehicle has programmed that remote.
Within ten seconds, Repeat step 3. for all additional remotes to be programmed.
Release valet/disarm button to exit programming mode. Test all remotes.
Same Day shipping on Expedited ordered before 2pm.
180 day replacement guarantee
ONLINE SUPPORT Free chat, phone, and email support.