1998 - 2003 Replacement Honda/Acura 4 Button Keyless Entry Remote Fob - KOBUTAH2T

Please contact us via phone (1-855-224-7258 EXT-3) or live support chat to the bottom right of our website to confirm programming for this product. Our techs will make sure you know everything you need to!

If our techs inform you that this product needs to be programmed by a Locksmith

Note: Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.  You must reprogram all of the keyless remotes once you are in the programming mode.

You must complete each step within 5 seconds  of the previous step to keep the system from exiting the programming mode.

1. Turn ignition switch to ON (II)

2. Press the LOCK or UNOCK button on one of the remotes. (An unprogrammed  remote can be used for this step.)

3. Turn ignition switch to LOCK (0)

4. Repeat steps 1, 2 and 3 two more times using the same keyless remote used in step 2

5. Turn the ignition switch to ON (II)

6. Press the LOCK or UNLOCK button the same remote.  Make sure the power door locks cycle to confirm you are in programming mode.

7. Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.

8. Turn the igniton switch to LOCK (0) to exit programming mode.

9. Test remote(s)