1998 - 2004 Toyota Avalon/Solara 4 Button Keyless Entry Remote w/ Trunk - HYQ12BAN

1998 - 2004 Toyota Avalon/Solara 4 Button Keyless Entry Remote w/ Trunk - HYQ12BAN

1998 - 2004 Toyota Avalon/Solara 4 Button Keyless Entry Remote w/ Trunk - HYQ12BAN

Dealer Price $190.8 Your Price $55.99 You save $134.81 That's 70.66% OFF dealer price!
Availability: In stock
SKU
1519

1998 - 2004 Toyota Avalon/Solara 4 Button Keyless Entry Remote w/ Trunk - HYQ12BAN


Fits:

1998 - 2004 Toyota Avalon
1998 - 2004 Toyota Solara

More Information
SKU1519
FCC NumberHYQ12BAN
OE Part #89742-AC050
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee!If you are not 100% satisfied, you may return the product within 50 days of receipt for a refund. Please see our return policy for further info.
Programming InformationThis remote comes with self programming instructions. You can view them under the 'Programming Instructions' tab.
Product ConditionRefurbished
Programming Instructions
  1. Start with key out of the ignition, open and unlock drivers door and be sure all other doors and trunk are closed.
  2. Insert key into ignition (Do not turn) and pull it out.
  3. Perform these steps within 40 seconds. A. Using the power door lock rocker switch on drivers door perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second. (1 cycle = 1 lock and 1 unlock.).
  4. Close, then open drivers door.
  5. Perform these steps within 40 seconds. A. Using the power door lock rocker switch on drivers door perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second. (1 cycle = 1 lock and 1 unlock.) B. Insert the key in the ignition cylinder. C. Turn the ignition to ON (Just shy of starting car, Do NOT Start) then back to OFF. D. Turn the ignition to ON (Just shy of starting car, Do NOT Start)) then back to OFF. E. Remove the key from the ignition.
  6. Within 3 seconds the power door locks should cycle automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point, if they do cycle then continue to step 7.
  7. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1 second. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds the door locks should cycle once indicating successful programming. If the door locks don’t cycle or cycle twice, repeat steps A and B, your remote has not been accepted. C. Repeat steps A and B in step 7 for each new transmitter.
  8. Close drivers door. Test all remotes. Programming is complete.
msrp190.80