1998 - 2005 Lexus 3 Button Remote Head Key - HYQ1512V (24021,50021,24020)

1998 - 2005 Lexus 3 Button Remote Head Key - HYQ1512V (24021,50021,24020)

1998 - 2005 Lexus 3 Button Remote Head Key - HYQ1512V (24021,50021,24020)

1998 - 2005 Lexus 3 Button Remote Head Key - HYQ1512V (24021,50021,24020)
Dealer Price $206 Your Price $102.99 You save $103.01 That's 50% OFF dealer price!
Availability: In stock
SKU
1501

1998 - 2005 Lexus 3 Button Remote Head Key - HYQ1512V (24021,50021,24020)

OE: 89070-53531

Notes: Short key blade version - White car printed in remote button

Fits:

2002 - 2003 Lexus ES300
2001 - 2005 Lexus GS430
1998 - 2000 Lexus GS400
1998 - 2005 Lexus GS300
2001 - 2005 Lexus IS300
1998 - 2000 Lexus LS400

More Information
SKU1501
FCC NumberHYQ1512V
OE Part #89070-53531
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee!If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming InformationThis remote comes with self programming instructions that you can view under the 'Programming Instructions' tab. These instructions ONLY program the remote portion of the key. The key must be cut and the chip must be programmed in FIRST in order to self program the remote portion. An automotive locksmith can come out and cut/program the unit in for you. The cost for key cutting/program will vary depending on your location.
Product ConditionRefurbished
Programming Instructions

IMPORTANT: These instructions ONLY program the remote portion of the key. The key must be cut and the chip must be programmed in FIRST in order to self program the remote portion. 

Please look for your Lexus model and use the programming instructions provided. 
 

Lexus ES300

Obtain all remote transmitters for this vehicle.

 

1. Start with the key out of the ignition, drivers door is open, all other doors and trunk closed and drivers door is unlocked.


2. Perform these steps within 5 seconds. A. Insert the key into the ignition (Do NOT Turn it) and Pull key out. B. Insert the key into the ignition (Do NOT Turn it) and Pull key out.


3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition (Do NOT Turn it) and Pull key out.


4. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in the ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start or crank engine) then back to OFF. F. Remove the key from the ignition.


5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the door locks do not cycle at this point.


6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote.


7. Open drivers door.

 

Lexus GS430, Lexus GS400, Lexus GS300, Lexus IS300 & Lexus LS400

Obtain all remote transmitters for this vehicle.

 

1. Start with key out of the ignition, open and unlock drivers door and be sure all other doors and trunk are closed.


2. Insert key into ignition (Do not turn) and pull it out.


3. Perform these steps within 40 seconds. A. Using the power door lock rocker switch on drivers door perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second. (1 cycle = 1 lock and 1 unlock.).


4. Close, then open drivers door.


5. Perform these steps within 40 seconds. A. Using the power door lock rocker switch on drivers door perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second. (1 cycle = 1 lock and 1 unlock.) B. Insert the key in the ignition cylinder. C. Turn the ignition to ON (Just shy of starting car, Do NOT Start) then back to OFF. D. Turn the ignition to ON (Just shy of starting car, Do NOT Start)) then back to OFF. E. Remove the key from the ignition.


6. Within 3 seconds the power door locks should cycle automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point, if they do cycle then continue to step 7.


7. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1 second. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds the door locks should cycle once indicating successful programming. If the door locks don't cycle or cycle twice, repeat steps A and B, your remote has not been accepted. C. Repeat steps A and B in step 7 for each new transmitter.


8. Close drivers door.


9. Test all remotes.

msrp206.00