1998 - 2008 Ford & Lincoln 5 Button Keyless Entry Remote Fob - CWTWB1U511

Dealer price: $79.99

Your price: $32.99

You Save: $47.00

That's 58.76% OFF dealer price!

In stock
1998 - 2008 Ford & Lincoln 5 Button Keyless Entry Remote Fob - CWTWB1U511

1998 - 2008 Ford & Lincoln 5 Button Keyless Entry Remote Fob - CWTWB1U511

Fits:

2004 - 2008 Ford Freestar
1998 - 2003 Ford Windstar
2003 - 2010 Lincoln Navigator

IMPORTANT: For Lincoln Navigator you MUST verify FCC ID as there are two different ones that could possibly go to this vehicle. 

 

The following models cannot be self programmed and would need an automotive locksmith to come out and program the unit in for you:

2009 - 2010 Lincoln Navigator

Product Specs and Programming Information
SKU 765
FCC Number CWTWB1U511
OE Part # 3F2T-15K601-AA, 3F2Z-15K601-AA
Support Your purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee! If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming Information MOST models come with self programming instructions. You can view them under the 'Programming Instructions' tab. All other models will need an automotive locksmith to come out and program the unit in for you.
Product Condition Refurbished
Programming Instructions

Programming Instructions for: Ford Freestar & Ford Windstar

1. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in 

    RUN. Door locks will cycle to confirm programming mode.

2. Within 20 seconds press any button on first keyless remote. Door locks will cycle
    to confirm programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will
    cycle again to confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.


Programming Instructions for: 2003 - 2008 Lincoln Navigator

 1. Close all doors and then open drivers door and press the UNLOCK 

    button on drivers door panel while door is open and insert key in ignition.  

 2. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 

    8th time ending in RUN. Door locks will cycle to confirm programming
    mode.

 3. Within 20 seconds press any button on first keyless remote. 

    Door locks will cycle to confirm programming.

 4. Within 20 seconds, press any button on second keyless remote. 

    Door locks will cycle again to confirm programming.

 5. Turn ignition to OFF. 

     Locks will again cycle to indicate end of programming mode.


msrp $79.99
Copyright © 2019-present Replacemyremote.com All rights reserved.