1999 - 2000 Lexus LX470 3 Button Remote Head Key

1999 - 2000 Lexus LX470 3 Button Remote Head Key

1999 - 2000 Lexus LX470 3 Button Remote Head Key

1999 - 2000 Lexus LX470 3 Button Remote Head Key
Dealer Price $232 Your Price $122.99 You save $109.01 That's 46.99% OFF dealer price!
Availability: In stock
SKU
1521

1999 - 2000 Lexus LX470 3 Button Remote Head Key

OE: 89070-60080

Notes: Long key blade version - Pink colored "Panic" button

Fits:

1999 - 2000 Lexus LX470

More Information
SKU1521
FCC Number60010
OE Part #89070-60080
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee!If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming InformationThis remote comes with self programming instructions for the remote portion ONLY. The blade and the chip would need to be programmed in by an automotive locksmith prior to programming the remote portion. The cost for key cutting/program will vary depending on your location. You can view the programming instructions under the 'Programming Instruction' tab.
Product ConditionRefurbished
Programming Instructions

These instructions will program the remote portion of your key ONLY. The blade and the chip must be cut first before programming the remote portion.

Obtain all remote transmitters for this vehicle.

 

1. Start with key out of the ignition, open and unlock drivers door and be sure all other doors and trunk are closed.


2. Insert key into ignition (Do not turn) and pull it out.


3. Perform these steps within 40 seconds. A. Using the power door lock rocker switch on drivers door perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second. (1 cycle = 1 lock and 1 unlock.).


4. Close, then open drivers door.


5. Perform these steps within 40 seconds. A. Using the power door lock rocker switch on drivers door perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second. (1 cycle = 1 lock and 1 unlock.) B. Insert the key in the ignition cylinder. C. Turn the ignition to ON (Just shy of starting car, Do NOT Start) then back to OFF. D. Turn the ignition to ON (Just shy of starting car, Do NOT Start)) then back to OFF. E. Remove the key from the ignition.


6. Within 3 seconds the power door locks should cycle automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point, if they do cycle then continue to step 7.


7. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1 second. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds the door locks should cycle once indicating successful programming. If the door locks don't cycle or cycle twice, repeat steps A and B, your remote has not been accepted. C. Repeat steps A and B in step 7 for each new transmitter.


8. Close drivers door.


9. Test all remotes.

msrp232.00