2002 - 2010 Nissan & Infiniti 4 Button Keyless Entry Remote Fob - KBRASTU15

Dealer Price $149.05 Your Price $35.30 You save $113.75 That's 76.32% OFF dealer price!
Availability: In stock

2002 - 2010 Nissan & Infiniti 4 Button Keyless Entry Remote Fob - KBRASTU15


2002 - 2008 Nissan 350Z
2002 - 2006 Nissan Altima
2002 - 2006 Nissan Maxima
2007 - 2012 Nissan Sentra
2002 - 2004 Infiniti I35
2003 - 2005 Infiniti G35

180 Day Satisfaction Guarantee!

If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further information.


More Information
OE Part #28268-ZB700
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
Programming InformationSOME models come with self programming instructions. You can view them under the 'Programming Instructions' tab. All other models will need an automotive locksmith to come out and program the unit in for you. NOTE: When looking under the 'Programming Instructions' tab please look for your specific model as the programming instructions vary.
Product ConditionRefurbished
Programming Instructions

2003 - 2006 Nissan 350Z

2002 - 2006 Altima 

2002 - 2006 Maxima

2002 - 2006 Sentra

2002 - 2004 Infiniti I35

2003 - 2005 Infiniti G35 (Without Smart Entry System)

1.   Close and lock all doors with the driver’s side power lock/unlock switch.
2.   Insert key into ignition and remove it from the ignition key cylinder at least six times 
     within 10
 seconds. Your Hazard Lamps will flash if you have performed this step 
     successfully. NOTE: Withdraw key completely from ignition cylinder each time. If this 
     procedure is performed too fast, system will not enter programming mode. 

3.   Insert key into the ignition cylinder and turn to the ACC position.

4.   Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should
 NOTE: Do not press the button more than one time in the above step. If the button
     is pressed more than one time, the programming procedure will not be successful.

5.   If there are any remaining transmitters (including the old ones), unlock then lock all doors
     using the driver’s side 
power lock/unlock switch and within 5 seconds, push ANY button 
     on the next remote. Your Hazard Lamps should flash. Repeat this step for each 
     transmitter (including any existing transmitters). 

6.  Turn the key to the OFF position, remove keys from the ignition, unlock doors using the 
    driver’s side power lock/unlock switch and open the driver side door.