2003 - 2007 Cadillac CTS/STS Transponder Key - PK3+ - B112PT

2003 - 2007 Cadillac CTS/STS Transponder Key - PK3+ - B112PT

2003 - 2007 Cadillac CTS/STS Transponder Key - PK3+ - B112PT

2003 - 2007 Cadillac CTS/STS Transponder Key - PK3+ - B112PT

Your Price $23.00
Availability: In stock
SKU
518

2003 - 2007 Cadillac CTS/STS Transponder Key - PK3+ - B112PT

Fits:

2003 - 2007 Cadillac CTS
2005 - 2007 Cadillac STS

More Information
SKU518
FCC NumberB112PT
OE Part #5928825
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee!If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming InformationThis key comes with self programming instructions. You can view them under the 'Programming Instructions' tab. These programming procedures are only good for USA built vehicles. The first digit of your 17 digit VIN number must start with the number 1 or 4. If your VIN number starts with a 2 or 3 or a letter these procedures WILL NOT WORK.
Product ConditionNew
Programming Instructions

These programming procedures are only good for USA built vehicles.

The first digit of your 17 digit VIN number must start with the number 1 or 4.
If your VIN number starts with a 2 or 3 or a letter these procedures WILL NOT WORK.

Can I program a new key myself if I have no working keys?
  
    
Yes, once you have had the new key cut by a Locksmith or other qualified persons use the following instructions.

1.  Insert a new cut key in ignition and turn key to the ON position for 10 minutes and 30 seconds.

2.  Within 45 seconds turn the key to OFF and then back to the ON position for 10 minutes and 30 seconds.

3. Within 45 seconds turn the key to OFF and then back to the ON position for 10 minutes and 30 seconds.

4.  Turn key OFF then back ON. The key is now programmed. Start vehicle to test key.

Can I program a duplicate key for this vehicle?

   Yes, once you have had the new key cut by a Locksmith or other qualified persons use the following instructions.

1. Insert an existing programmed working key into the ignition cylinder.    


2. Turn ignition to the ON position for 5 seconds, then back to OFF position.

3. Remove the existing key and within 5 seconds insert new key and turn it to the ON position for 5 seconds.

4. Turn key OFF then back to ON. The key is now programmed. Start vehicle to test key.