2003 - 2007 Honda OEM Accord 4 Button Remote Head Key- OUCG8D-380H-A - V Chip

2003 - 2007 Honda OEM Accord 4 Button Remote Head Key- OUCG8D-380H-A - V Chip

2003 - 2007 Honda OEM Accord 4 Button Remote Head Key- OUCG8D-380H-A - V Chip

Dealer Price $122.98 Your Price $49.99 You save $72.99 That's 59.35% OFF dealer price!
Availability: In stock
SKU
978

2003 - 2007 OEM Honda Accord 4 Button Remote Head Key- OUCG8D-380H-A - V Chip


Fits:

2003 - 2007 Honda Accord

PHILIPS ID 46

More Information
SKU978
FCC NumberOUCG8D-380H-A
OE Part #35118-SDA-A11
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee!If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming Information

Please contact us via phone (1-855-224-7258) or live support chat to the bottom right of our website to confirm programming for this product. Our techs will make sure you know everything you need to!

Product ConditionRefurbished
Programming Instructions

Honda Accord Keyless Entry Remote Fob Smart Key Programming Instructions

Note:
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work. You must reprogram all of the keyless remotes once you are in the programming mode.

You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.

1. Turn ignition switch to ON (II)

2. Press the LOCK or UNOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)

3. Turn ignition switch to LOCK (0)

4. Repeat steps 1, 2 and 3 two more times using the same keyless remote used in step 2

5. Turn the ignition switch to ON (II)

6. Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.

7. Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.

8. Turn the igniton switch to LOCK (0) to exit programming mode.

9. Test remote(s)

 

Use the instructions above to program the remote portion of the key but to cut and program key portion you will need a Locksmith.

msrp122.98