2003 - 2007 OEM GM 3 Button Keyless Entry Remote - LHJ011

Programming Instructions for vehicles EXCEPT Chevrolet Equinox, Pontiac Torrent, and Saturn Vue. These three vehicles are not self-programmable and  will require a Professional to program to your vehicle.

1. Get into the vehicle and close all of the doors. 

2. Insert the key into the ignition and do not turn on.

3. Hold down the power unlock button on the driver’s door panel. Continue to hold down the power unlock button until your are instructed to release in step 9.

4. Perform steps 5 through 8 in rapid succession.

5. Turn the ignition switch to the on position without starting the engine.

6. Turn the ignition switch to the off position.

7. Turn the ignition switch to the on position.

8. Turn the ignition switch to the off position.

9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically if completed correctly thus far.

10. Now press and hold down both the lock and unlock buttons on the remote simultaneously until the door locks and unlocks. This step may take up to 30 seconds to cycle.

11. Repeat step 10 now for each additional transmitter including all pre-existing remotes.

12. Turn the ignition switch to the on position in order to exit the transmitter programming mode.

13. Now you can test all of your remotes.