2003 - 2008 Lexus 3 Button Remote Head Key w/ Panic - HYQ1512V

Dealer price: $272.00

Your price: $112.99

You Save: $159.01

That's 58.46% OFF dealer price!

In stock
2003 - 2008 Lexus 3 Button Remote Head Key w/ Panic - HYQ1512V

2003 - 2008 Lexus 3 Button Remote Head Key w/ Panic - HYQ1512V

OE: 89070-60801

Notes: Short blade key version - Pink colored "Panic" button

Fits:  

2003 - 2008 Lexus GX470
2003 - 2008 Lexus LX470

Product Specs and Programming Information
SKU 1513
FCC Number HYQ1512V 60140
OE Part # 89070-60801
Support Your purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee! If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming Information This remote comes with self programming instructions for the remote portion ONLY. The blade and the chip would need to be programmed in by an automotive locksmith prior to programming the remote portion. The cost for key cutting/program will vary depending on your location. You can view the programming instructions under the 'Programming Instruction' tab.
Product Condition Refurbished
Programming Instructions

These instructions will program the remote portion of your key ONLY.   The blade and the chip would need to be cut then programmed in by an automotive locksmith prior to programming the remote portion. The cost for key cutting/program will vary depending on your location.

 

Obtain all remote transmitters for this vehicle.

 

1. Start with the key out of the ignition, drivers door is open, all other doors and trunk closed and drivers door is unlocked.


2. Perform these steps within 5 seconds. A. Insert the key into the ignition (Do NOT Turn it) and Pull key out. B. Insert the key into the ignition (Do NOT Turn it) and Pull key out.


3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition (Do NOT Turn it) and Pull key out.


4. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in the ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start or crank engine) then back to OFF. F. Remove the key from the ignition.


5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the door locks do not cycle at this point.


6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote.


7. Open drivers door.

 

msrp $272.00
Copyright © 2019-present Replacemyremote.com All rights reserved.