2003 - 2008 Toyota Matrix 4 Button Keyless Entry Remote Fob w/ Hatch - GQ43VT14T

2003 - 2008 Toyota Matrix 4 Button Keyless Entry Remote Fob w/ Hatch - GQ43VT14T

2003 - 2008 Toyota Matrix 4 Button Keyless Entry Remote Fob w/ Hatch - GQ43VT14T

Dealer Price $106.18 Your Price $54.99 You save $51.19 That's 48.21% OFF dealer price!
Availability: In stock
SKU
2701

2003 - 2008 Toyota Matrix 4 Button Keyless Entry Remote Fob w/ Hatch - GQ43VT14T

Fits:


2003 - 2008 Toyota Matrix

More Information
SKU2701
FCC NumberGQ43VT14T
OE Part #1470102849
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee!If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming InformationThis remote comes with self programming instructions. You can view them under the 'Programming Instructions' tab.
Product ConditionRefurbished
Programming Instructions


2003 - 2008 Pontiac Vibe

2003 - 2008 Toyota Matrix

1. Start with the key out of the ignition, drivers door is open all others closed and 
    locked, drivers door is unlocked.

2. Perform these steps within 5 seconds.
    A. Insert the key into the ignition(Do NOT Turn) Pull key out.
    B. Insert the key into the ignition(Do NOT Turn) Pull key out.

3. Perform these steps within 40 seconds.
    A. Close then open the drivers door.
    B. Close then open the drivers door.
    C. Insert the key into the ignition(Do NOT Turn) Pull key out.

4. Perform these steps within 40 seconds.
    A. Close then open the drivers door.
    B. Close then open the drivers door.
    C. Insert the key into ignition and leave it in ignition.
    D. Close the drivers door.
    E. Turn the ignition to ON (Do NOT Start) then back to OFF.
    F. Remove the key from the ignition.

5. Within 3 seconds, the power door locks should lock then unlock automatically
    indicating successful entry into programming mode.
    Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds.
    A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds.
    B. Immediately after letting go of the lock and unlock buttons,
        Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door
        locks should lock and then unlock once indicating successful programming. If
        the door locks cycle twice, repeat steps A and B in step 6 as the remote was
        not accepted.
    C. Repeat steps A and B in step 6 for each new remote.

7. Open drivers door.

msrp106.18