2004 - 2008 OEM Acura TL/TSX 4 Button Keyless Entry Remote Fob - OUCG8D-387H-A/G8D-344H-A

Dealer Price $149.99 Your Price $72.76 You save $77.23 That's 51.49% OFF dealer price!
Availability: In stock
SKU
253

2004 - 2008 OEM Acura TL/TSX 4 Button Keyless Entry Remote Fob - OUCG8D-387H-A/G8D-344H-A

Fits:

2004 - 2006 Acura TL
2004 - 2008 Acura TSX

180 Day Satisfaction Guarantee!

If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further information.

 

More Information
SKU253
FCC NumberOUCG8D-387H-A/G8D-344H-A
OE Part #72147-SEP-A52
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
Programming InformationPlease Check if your vehicle has Self-Programming instructions by Clicking the Tab Above. "Programming Instructions"
Product ConditionRefurbished
Programming Instructions

2004 - 2006 Acura TL
2004 - 2008 Acura TSX

Note:
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work. You must reprogram all of the keyless remotes once you are in the programming mode.

You must complete each step within 4 seconds of the previous step to keep the system from exiting the programming mode. You must program remotes within 10 seconds of each other

1. Turn ignition switch to ON (II)

2. Within 4 seconds press the LOCK or UNOCK button on one of the remotes.
(An unprogrammed remote can be used for this step.)

3. Within 4 seconds turn ignition switch to LOCK (0) position

4. Within 4 seconds turn the ignition switch to ON (II)

5. Repeat steps 2, 3 and 4 two more times using the same keyless remote used in step 2

6. Within 4 seconds press the LOCK or UNLOCK button on the same remote. Make sure the power door locks cycle to confirm you are in programming mode.

7. Within 10 seconds press the LOCK or UNLOCK button on same remote.

8. Within 10 seconds press the LOCK or UNLOCK button on all other remotes you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.

9. Turn the igniton switch to LOCK (0) to exit programming mode.

10. Test remote(s)

 

msrp149.99