2004 - 2017 OEM Toyota Sienna 5 Button Keyless Entry Remote Fob - GQ43VT20T

Dealer price: $165.15

Your price: $59.99

You Save: $105.16

That's 63.68% OFF dealer price!

In stock

2004 - 2017 OEM Toyota Sienna 5 Button Keyless Entry Remote Fob - GQ43VT20T

2004 - 2017 OEM Toyota Sienna 5 Button Keyless Entry Remote Fob - GQ43VT20T


Fits:

2004 - 2017 Toyota Sienna

Product Specs and Programming Information
SKU 2722
FCC Number GQ43VT20T
OE Part # 89742-AE030
Support Your purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee! If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming Information MOST models come with self programming instructions. You can view them under the 'Programming Instructions' tab. All other models will need an automotive locksmith to come out and program the unit in for you. The cost for key cutting/program will vary depending on your location.
Product Condition Refurbished
Programming Instructions

2004-2010 Sienna


1. Start with the key out of the ignition, drivers door is open all others closed and 
    drivers door is unlocked.

2. Perform these steps within 5 seconds.
    A. Insert the key into the ignition(Do NOT Turn) Pull key out.
    B. Insert the key into the ignition(Do NOT Turn) Pull key out.

3. Perform these steps within 40 seconds.
    A. Close then open the drivers door.
    B. Close then open the drivers door.
    C. Insert the key into the ignition(Do NOT Turn) Pull key out.

4. Perform these steps within 40 seconds.
    A. Close then open the drivers door.
    B. Close then open the drivers door.
    C. Insert the key into ignition and leave it in ignition.
    D. Close the drivers door.
    E. Turn the ignition to ON (Do NOT Start) then back to OFF.
    F. Remove the key from the ignition.

5. Within 3 seconds, the power door locks should lock then unlock automatically
    indicating successful entry into programming mode.
    Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds.
    A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds.
    B. Immediately after letting go of the lock and unlock buttons,
        Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door
        locks should lock and then unlock once indicating successful programming. If
        the door locks cycle twice, repeat steps A and B in step 6 as the remote was
        not accepted.
    C. Repeat steps A and B in step 6 for each new remote.

7. Open drivers door

 

 

msrp $165.15
Copyright © 2019-present Replacemyremote.com All rights reserved.