2004 - 2015 OEM Toyota Sienna 6 Button Keyless Entry Remote w/ Rear Hatch - GQ43VT20T

2004 - 2015 OEM Toyota Sienna 6 Button Keyless Entry Remote w/ Rear Hatch - GQ43VT20T

2004 - 2015 OEM Toyota Sienna 6 Button Keyless Entry Remote w/ Rear Hatch - GQ43VT20T

2004 - 2015 OEM Toyota Sienna 6 Button Keyless Entry Remote w/ Rear Hatch - GQ43VT20T
Dealer Price $190.91 Your Price $68.00 You save $122.91 That's 64.38% OFF dealer price!
Availability: In stock
SKU
2723

2004 - 2015 OEM Toyota Sienna 6 Button Keyless Entry Remote w/ Rear Hatch - GQ43VT20T


Fits:

2004 - 2015 Toyota Sienna

More Information
SKU2723
FCC NumberGQ43VT20T
OE Part #89742-AE050
SupportYour purchase gives you 100% Free email and phone technical support service from our expert staff.
180 Day Satisfaction Guarantee!If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming InformationONLY 2004-2009 SIENNA models come with self programming instructions. You can view them under the 'Programming Instructions' tab. All other models will need an automotive locksmith to come out and program the unit in for you. NOTE: When looking under the 'Programming Instructions' tab please look for your specific model as the programming instructions vary.
Product ConditionRefurbished
Programming Instructions

ONLY 2004-2009 SIENNA:

1. Start with the key out of the ignition, driver’s door is open, all other doors and trunk closed and driver’s door is unlocked.

2. Perform these steps within 5 seconds.

A. Insert the key into the ignition (Do NOT Turn it) and Pull key out.

B. Insert the key into the ignition (Do NOT Turn it) and Pull key out.

3. Perform these steps within 40 seconds.

A. Close then open the driver’s door.

B. Close then open the driver’s door.

C. Insert the key into the ignition (Do NOT Turn it) and Pull key out.

4. Perform these steps within 40 seconds.

A. Close then open the driver’s door.

B. Close then open the driver’s door.

C. Insert the key into ignition and leave it in the ignition.

D. Close the driver’s door.

E. Turn the ignition to ON (Do NOT Start or crank engine) then back to OFF.

F. Remove the key from the ignition.

5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the door locks do not cycle at this point.

6. Perform these steps within 40 seconds.

A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds.

B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted.

C. Repeat steps A and B in step 6 for each new remote.


7. Open driver’s door.

msrp190.91