2004 - 2017 Replacement Toyota 3 Button Keyless Entry Remote Fob - GQ43VT20T

Dealer price: $190.24

Your price: $27.99

You Save: $162.25

That's 85.29% OFF dealer price!

In stock

2004 - 2017 Replacement Toyota 3 Button Keyless Entry Remote Fob - GQ43VT20T

2004 - 2017 Replacement Toyota 3 Button Keyless Entry Remote Fob - GQ43VT20T

Fits:

2007 - 2013 Toyota Highlander
2008 - 2016 Toyota Sequoia
2004 - 2017 Toyota Sienna
2005 - 2015 Toyota Tacoma
2007 - 2017 Toyota Tundra

Product Specs and Programming Information
SKU2709-A
FCC NumberGQ43VT20T
OE Part #89742-AE010, 89742-AE011
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee!If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming InformationSOME models come with self programming instructions. You can view them under the 'Programming Instructions' tab. All other models will need an automotive locksmith to come out and program the unit in for you. The cost for key cutting/program will vary depending on your location.
Product ConditionNew
Programming Instructions

2007 Highlander

2007-2008 Sequoia

2004-2009 Sienna

2005-2012 Tacoma

2007-2009 Tundra


1. Start with key out of ignition, drivers door is open all others closed and 
    drivers door is unlocked.

2. Insert key into the ignition (Do NOT Turn) and Pull key out.

3. Perform these steps within 40 seconds.
    A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
        starting with lock. Use an even pace and try to go about one cycle per second.
        (1Cycle  = 1 lock and 1 unlock).
    B. Close, then open drivers door.

4. Perform these steps within 40 seconds.
    A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
        starting with lock. Use an even pace and try to go about one cycle per second.
         (1Cycle  = 1 lock and 1 unlock).
    B. Insert the key in the ignition cylinder.
    C. Turn the ignition to ON (Do NOT Start) then back to OFF.
    D. Remove the key from the ignition.

5. Within 3 seconds the power door locks should cycle automatically indicating successful
    entry into programming mode. Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds.
    A. Press the lock and unlock buttons on the remote simultaneously for 1 second.
    B. Immediately after letting go of the lock and unlock buttons, press the lock button by
        itself and hold for 2 seconds. Within 3 seconds, the door locks should cycle once
        indicating successful programming. If the door locks do not cycle, or cycle twice.
        repeat steps A and B in step 6 as your remote has not been accepted.
    C. Repeat steps A and B in step 6 for each new remote.

7. Close drivers door.


2008 - 2013 Highlander

1. Start with the key out of the ignition, drivers door is open all others closed and drivers door is unlocked.

2. Perform these steps within 5 seconds.
    A. Insert the key into the ignition(Do NOT Turn) Pull key out.
    B. Insert the key into the ignition(Do NOT Turn) Pull key out.

3. Perform these steps within 40 seconds.
    A. Close then open the drivers door.
    B. Close then open the drivers door.
    C. Insert the key into the ignition(Do NOT Turn) Pull key out and close drivers door.

4. Perform these steps within 40 seconds.
    A. Switch ignition ON and OFF once to program a new remote while keep other programmed remotes programmed.
    B.  or switch ignition ON and OFF twice to program a new remote and erase all other programmed remotes.
    C. Remove the key from the ignition.
  
5. Within 3 seconds, the power door locks should lock then unlock one or two times depending on which you choose in step four.  Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds.
    A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds.
    B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted.
    C. Repeat steps A and B in step 6 for each new remote.

7. Open drivers door.

Alternate programming instructions: 

 Driver’s door open, key removed from ignition switch
    Within 5 seconds: Insert and remove the key from the ignition switch twice
    Within 40 seconds: Close and open driver’s door twice
    Insert and remove the key from the ignition switch. Close and open driver’s door twice
    Insert the key into the ignition switch and close the driver’s door
    Within 40 seconds: Switch ignition ON and OFF once to program a remote transmitter code whilst retaining the original codes or twice to program and remote transmitter code whilst erasing the original codes. Three times to check how many remote transmitter are currently registered or five times to erase all registered codes
    Remove key from ignition switch. System should now lock and unlock vehicle once, twice or five times depending which mode has been selected. One to four times, slowly, to indicate number of remote transmitters registered
    Within 40 seconds: Press and hold LOCK and UNLOCK buttons simultaneously for 1.5 seconds
    Within 3 seconds: Press LOCK button
    SYstem should now lock and unlock vehicle once to confirm registration, twice to indicate registration has failed
    Within 40 seconds: Repeat button procedure to program remaining remote transmitters.
    NOTE: To exit programming mode: Open driver’s dorr
    NOTE: A maximum of 4 remote transmitters can be programmed
If the above programming procedures do not work, then you should contact your locksmith.


msrp$190.24
Copyright © 2019-present Replacemyremote.com All rights reserved.