2005 - 2011 Subaru 2 Button Keyless Entry Remote - NHVWB1U711

Dealer Price $160.31 Your Price $83.45 You save $76.86 That's 47.94% OFF dealer price!
Availability: In stock

2005 - 2011 Subaru 2 Button Keyless Entry Remote - NHVWB1U711

OE: 88036FE041


2006 Subaru Baja
2006 - 2010 Subaru Forester
2006 - 2011 Subaru Impreza
2005 - 2010 Subaru Legacy
2005 - 2010 Subaru Outback

You may be sent a re-cased item if the OEM casing does not meet our quality inspection requirements. 

180 Day Satisfaction Guarantee!

If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further information.


More Information
FCC NumberNHVWB1U711
OE Part #88036FE041
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
Programming InformationPlease contact us via phone (1-855-224-7258 EXT-3) or live support chat to the bottom right of our website to confirm programming for this product. Our techs will make sure you know everything you need to!
Product ConditionRefurbished
Programming Instructions

Step by Step How to Programming Instructions:


Note: A maximum of 4 remote key fobs can be programmed at one time. Deactivate alarm if fitted. Locate and record the remote ID number either from the package if new or open up remote if used and there will be an 8 digit code that will be needed to program remote.


  1. Open drivers door enter vehicle and close drivers door.


  1. Within 15 seconds turn key to the ON position and back to LOCK 10 times. An acoustic signal is emitted once to indicate programming mode has been activated. Another continuous acoustic signal will follow and interior lamp will flash until programming is complete.


Note: If an error occurs during programming, the acoustic signal will stop, the interior lamp will go out and the programming will need to be started again. 


Within 45 seconds:

  1. Open and close driver's door. An acoustic signal is emitted until the ID number is entered.


  1. Press the LOCK button on the door panel the same number of times as the first digit on the remote ID code.


  1. When the digit has been entered press the UNLOCK button on the door panel.


  1. Repeat procedure with each digit in the remote ID code counting from left to right.


  1. Repeat programming procedure for the entire ID number a second time.


  1. An acoustic signal is emitted once to indicate programming complete.


Repeat ID number entering procedure for any additional remotes to be programmed and test remotes.