2006 - 2016 GM 4 Button Keyless Entry Remote Fob - OUC60270, OUC60221

2006 - 2016 GM 4 Button Keyless Entry Remote Fob - OUC60270, OUC60221
Your Price $58.84
Availability: In stock
SKU
927

2006 - 2016 GM 4 Button Keyless Entry Remote Fob - OUC60270, OUC60221

Fits:

2006 - 2011 Buick Lucerne
2006 - 2008 Cadillac DTS
2006 - 2012 Chevrolet Monte Carlo
2006 - 2016 Chevrolet Impala

180 Day Satisfaction Guarantee!

If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further information.

 

More Information
SKU927
FCC NumberOUC60270, OUC60221
OE Part #20935330, 15912859, 22952177
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
Programming InformationSome models come with self programming instructions. You can view them under the 'Programming Instructions' tab. All other models will need an automotive locksmith to come out and program the unit in for you. NOTE: When looking under the 'Programming Instructions' tab please look for your specific model as the programming instructions vary.
Product ConditionRefurbished
Programming Instructions

2006 - 2010 Buick Lucerne
2006 - 2010 Cadillac DTS
2006 - 2007 Chevrolet Monte Carlo
2006 - 2010 Chevrolet Impala

Use this Procedure for Vehicles with
Driver Information Center Buttons

This information is in your Owners Manual in the
Drivers Information Center Section.

1. Insert Key and turn to ON position so you can access Driver Information Center

2. Press the vehicle information button until
    PRESS TO RELEARN REMOTE KEY displays 

3. Press the set/reset button until
    REMOTE KEY LEARNING ACTIVE  displays

4.  Press and hold the lock and unlock buttons on the keyless remote at the same
     time for approximatley 15 seconds. A chime will sound indicating that the remote is 
     programmed.

5.  To program additional remotes at this time repeat step 4.
      This vehicle can have a maximum of eight remotes programmed.

6.  To exit programming mode turn key off and remove key.
     Test remote(s).



Use this Procedure for Vehicles without
Drivers Information Center Buttons

To access this display, the vehicle must be in Park (P) with key in the on position (as far
    as you can go without cranking engine)

1. Press the trip odometer reset stem until RELEARN REMOTE KEY displays. 

2. Press and hold the trip odometer reset stem for three seconds.
    The message  REMOTE KEY LEARNING ACTIVE  will display 

3.  Press and hold the lock and unlock buttons on the first keyless remote at the same
     time for approximately 15 seconds. A chime
will sound indicating that the remote is 
     programmed.

4.  To program additional remotes at this time repeat step 3.
    
This vehicle can have a maximum of eight remotes programmed.

5.  To exit programming mode turn key off and remove key.
    
Test remote(s).