2007 - 2013 Chrysler 5 Button Remote Head Key w/o Remote Start - OHT692427AA

Please contact us via phone (1-855-224-7258) or live support chat to the bottom right of our website to confirm programming for this product. Our techs will make sure you know everything you need to!

If our techs inform you that this product needs to be programmed by a Locksmith, you may do Google search here for 'automotive locksmith' followed by your zip code. We suggest calling Locksmiths to find the best rate for the programming and/or cutting service.

2011 - 2013 Chrysler 200
2007 - 2010 Chrysler Sebring

If you do not have two programmed Remote Head Keys available you will need to have a locksmith program two keys for you.

If you have two programmed working Remote Head Keys use the following instructions to program an additional Remote Head Key.

At the time of purchase, the original owner is provided with a four-digit PIN number. This number is required for programming if two programmed keys are not available.

You can program new keys to the system if you have two valid keys by performing the following procedure:

1. Cut the additional Key Transponder blank(s) to match the ignition switch lock cylinder key code.

2. Insert the first valid key into the ignition switch and turn the ignition switch ON for at least 3 seconds but no longer than 15 seconds. Turn the ignition switch OFF and remove the first key.

3. Insert the second valid key and turn the ignition switch ON within 15 seconds. After ten seconds, a chime will sound and the Theft Alarm Light will begin to flash.Turn the ignition switch OFF and remove the second key.

4. Insert a blank Key into the ignition switch and turn the ignition switch ON within 60 seconds. After 10 seconds a single chime will sound. The Theft Alarm Light will stop flashing, turn on for 3 seconds; then turn off. The new Sentry Key has been programmed.

Repeat this procedure to program up to 8 keys.