2007 - 2013 GM 5 Button Keyless Entry Remote Fob - OUC60270 - 15913418

Please contact us via phone (1-855-224-7258 EXT-3) or live support chat to the bottom right of our website to confirm programming for this product. Our techs will make sure you know everything you need to!

If our techs inform you that this product needs to be programmed by a Locksmith, you may do Google search here for 'automotive locksmith' followed by your zip code. We suggest calling Locksmiths to find the best rate for the programming and/or cutting service.

2007 – 2010 Cadillac Escalade
2007 - 2010 Chevrolet Suburban
2007 - 2010 Chevrolet Tahoe
2007 - 2010 GMC Yukon

Use this Procedure for Vehicles with Driver Information Center Buttons

1. Insert Key and turn to ON position so you can access Driver Information Center
   
   2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays
   
   3. Press the set/reset button until REMOTE KEY LEARNING ACTIVE  displays
   
   4.  Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is programmed.
   
   5.  To program additional remotes at this time repeat step 4. This vehicle can have a maximum of eight remotes programmed.
2. To exit programming mode turn key off and remove key.Test remote(s).

Use this Procedure for Vehicles without Drivers Information Center Buttons

To access this display, the vehicle must be in Park (P) with key in the on position (as far as you can go without cranking engine)

1. Press the trip odometer reset stem until RELEARN REMOTE KEY displays. 

2. Press and hold the trip odometer reset stem for three seconds.The message REMOTE KEY LEARNING ACTIVE will display 
3. Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is programmed.
4. To program additional remotes at this time repeat step 3. This vehicle can have a maximum of eight remotes programmed.
   
   5.  To exit programming mode turn key off and remove key.Test remote(s).