2007 - 2016 Toyota 4 Button Remote Head Key (G Blade) - GQ4-29T

Dealer price: $236.18

Your price: $58.00

You Save: $178.18

That's 75.44% OFF dealer price!

In stock
2007 - 2016 Toyota 4 Button Remote Head Key (G Blade) - GQ4-29T

2007 - 2016 Toyota 4 Button Remote Head Key (G Blade) - GQ4-29T

*Please verify that your existing key has a 'G' stamp on the blade before purchasing this remote.

Fits:

2007 - 2012 Toyota Avalon
2009 - 2013 Toyota Corolla
2009 - 2016 Toyota Venza (instead of hatch the unit will have a trunk button but function for a hatch)

Product Specs and Programming Information
SKU 2720
FCC Number GQ4-29T
OE Part # 89070-02620, 89070-0T080
Support Your purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee! If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming Information ONLY TWO models come with self programming instructions. You can view them under the 'Programming Instructions' tab. All other models will need an automotive locksmith to come out and program the unit in for you. The cost for key cutting/program will vary depending on your location.
Product Condition Refurbished
Programming Instructions

Product Description


2007-2008 Avalon ONLY

 

Obtain all remote transmitters for this vehicle.

 

IF YOUR VEHICLE USES A SMART KEY SYSTEM THEN REMOTE MUST BE PROGRAMMED BY A DEALER OR LOCKSMITH.

 

This Programming procedure for vehicles without smart key system.

 

1. Start with the key out of the ignition, drivers door is open, all other doors and trunk closed and drivers door is unlocked.

 


2. Perform these steps within 5 seconds. A. Insert the key into the ignition (Do NOT Turn it) and Pull key out. B. Insert the key into the ignition (Do NOT Turn it) and Pull key out.

 


3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition (Do NOT Turn it) and Pull key out.

 


4. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in the ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start or crank engine) then back to OFF. F. Remove the key from the ignition.

 


5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the door locks do not cycle at this point.

 


6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote.

 


7. Open drivers door.

msrp $236.18
Copyright © 2019-present Replacemyremote.com All rights reserved.