2008 - 2013 Toyota 4 Button Remote Head Key - 4D67 Chip - GQ4-29T

2008 - 2013 Toyota 4 Button Remote Head Key - 4D67 Chip - GQ4-29T

2008 - 2013 Toyota 4 Button Remote Head Key - 4D67 Chip - GQ4-29T

Dealer Price $236.18 Your Price $58.00 You save $178.18 That's 75.44% OFF dealer price!
Availability: In stock
SKU
2712

2008 - 2013 Toyota 4 Button Remote Head Key - 4D67 Chip - GQ4-29T

*Please verify that your existing key has a 'dot' stamp on the blade before purchasing this remote.



Fits:

2011 - 2012 Toyota Avalon
2011 - 2012 Toyota Avalon Limited
2008 - 2012 Toyota Avalon XL
2008 - 2012 Toyota Avalon XLS
2009 - 2013 Toyota Corolla (THIS FCC IS FOR VEHICLES THAT VIN#  BEGINS WITH "1 or 2"  ONLY. If your VIN starts with "J" please click here)

 

*** If you are interested in having a Flip Key Remote Please refer to SKU 6667. This will work the same way this remote head key does but just has a Different style/look.***

More Information
SKU2712
FCC NumberGQ4-29T
OE Part #89070-06232, 89070-02270
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee!If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming InformationONLY 2008 AVALON models with separate key and remote come with self programming instructions. You can view them under the 'Programming Instructions' tab. All other models will need an automotive locksmith to come out and program the unit in for you. The cost for key cutting/program will vary depending on your location.
Product ConditionRefurbished
Programming Instructions

This procedure is for 2008 Avalon models that have a seperate key and remote.

If you have a Smart Key you will have to have a Locksmith or Dealership 
program it for you.
 

1. Start with the key out of the ignition, drivers door is open all others closed and 
    drivers door is unlocked.

2. Perform these steps within 5 seconds.
    A. Insert the key into the ignition(Do NOT Turn) Pull key out.
    B. Insert the key into the ignition(Do NOT Turn) Pull key out.

3. Perform these steps within 40 seconds.
    A. Close then open the drivers door.
    B. Close then open the drivers door.
    C. Insert the key into the ignition(Do NOT Turn) Pull key out.

4. Perform these steps within 40 seconds.
    A. Close then open the drivers door.
    B. Close then open the drivers door.
    C. Insert the key into ignition and leave it in ignition.
    D. Close the drivers door.
    E. Turn the ignition to ON (Do NOT Start) then back to OFF.
    F. Remove the key from the ignition.

5. Within 3 seconds, the power door locks should lock then unlock automatically
    indicating successful entry into programming mode.
    Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds.
    A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds.
    B. Immediately after letting go of the lock and unlock buttons,
        Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door
        locks should lock and then unlock once indicating successful programming. If
        the door locks cycle twice, repeat steps A and B in step 6 as the remote was
        not accepted.
    C. Repeat steps A and B in step 6 for each new remote.

7. Open drivers door.

msrp236.18