2008 - 2013 Toyota Highlander 4 Button Keyless Entry Remote Fob w/ Rear Glass - GQ43VT20T

2008 - 2013 Toyota Highlander 4 Button Keyless Entry Remote Fob w/ Rear Glass - GQ43VT20T

2008 - 2013 Toyota Highlander 4 Button Keyless Entry Remote Fob w/ Rear Glass - GQ43VT20T

Dealer Price $178.63 Your Price $58.00 You save $120.63 That's 67.53% OFF dealer price!
Availability: In stock
SKU
2759

2008 - 2013 Toyota Highlander 4 Button Keyless Entry Remote Fob w/ Rear Glass - GQ43VT20T

Fits:

2008 - 2013 Toyota Highlander

More Information
SKU2759
FCC NumberGQ43VT20T
OE Part #89742-0W010, 89742-0W011
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee!If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming Information

Please contact us via phone (1-855-224-7258 EXT-3) or live support chat to the bottom right of our website to confirm programming for this product. Our techs will make sure you know everything you need to!

If our techs inform you that this product needs to be programmed by a Locksmith, you may do Google search here for 'automotive locksmith' followed by your zip code. We suggest calling Locksmiths to find the best rate for the programming and/or cutting service.

Product ConditionRefurbished
Programming Instructions

Programming Instructions:

Start with the key out of the ignition, drivers door is open, all other doors and trunk closed and drivers door is unlocked.

1. Perform these steps within 5 seconds: A. Insert the key into the ignition (Do NOT Turn it) and Pull key out. B. Insert the key into the ignition (Do NOT Turn it) and Pull key out.

2. Perform these steps within 40 seconds: A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition (Do NOT Turn it) and Pull key out.

3. Perform these steps within 40 seconds: A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in the ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start or crank engine) then back to OFF. F. Remove the key from the ignition.

4. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the door locks do not cycle at this point.

5. Perform these steps within 40 seconds: A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote.

6. Open drivers door. Programming is complete.

msrp178.63