2008 - 2019 Dodge 6 Button Non-Prox Fobik Key - Emergency key included - IYZ-C01C

2008 - 2019 Dodge 6 Button Non-Prox Fobik Key - Emergency key included - IYZ-C01C

2008 - 2019 Dodge 6 Button Non-Prox Fobik Key - Emergency key included - IYZ-C01C

Your Price $72.99
Availability: In stock
SKU
655MTO

2008 - 2018 Dodge 6 Button Non-Prox Fobik Key - Emergency key included - IYZ-C01C

*This non-prox remote is not for a push-button-start vehicle*

Fits:

2008 - 2014 Dodge Caravan
2008 - 2019 Dodge Grand Caravan

 

More Information
SKU655MTO
FCC NumberIYZ-C01C
OE Part #2701A-C01C (Interchangeable with 267F-5WY783X)
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee!If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming InformationSome models come with self programming instructions. You can view them under the 'Programming Instructions' tab.
Product ConditionRefurbished
Programming Instructions

**You MUST HAVE two working programmed transmitters before
you can add a third transmitters.


**If you only have ONE WORKING TRANSMITTER and want to add a
second transmitter this procedure WILL NOT WORK and you will
need to contact an automotive locksmith in your area.

1. Using first programmed transmitter turn ignition to the ON position
for 3 seconds but no longer than 15 seconds.
(Do not crank engine). Turn transmitter off and remove.

2. Within 15 seconds insert second working programmed transmitter.
Turn ignition to the ON position (Do not crank engine) After 10 seconds
an acoustic signal will be heard and immobilizer warning lamp wil
flash. Turn transmitter OFF and remove second programmed
transmitter.

3. Within 60 seconds insert third NEW non-programmed transmitter into
ignition and turn to the ON position (Do not crank engine).
After 10 seconds an acoustical signal will be heard and immobilizer
warning lamp will illuminate for 3 seconds.

4. Turn transmitter to the OFF position and remove.

5. Test transmitters.

Repeat procedure for additional transmitters if required.
A maximum of 8 transmitters can be programmed.